LME49723MAX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | LME49723 |
| Operating Supply Voltage | 17V |
| Number of Elements | 2 |
| Operating Supply Current | 6.7mA |
| Nominal Supply Current | 6.7mA |
| Output Current | 25mA |
| Slew Rate | 8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Audio |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 200nA |
| Voltage - Supply, Single/Dual (±) | ±2.5V~17V |
| Output Current per Channel | 25mA |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 1mV |
| Gain Bandwidth Product | 19MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 19000 kHz |
| Voltage Gain | 105dB |
| Average Bias Current-Max (IIB) | 0.3μA |
| Power Supply Rejection Ratio (PSRR) | 95dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 300μV |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.3μA |
| Programmable Power | NO |
| Dual Supply Voltage | 15V |
| Wideband | NO |
| Input Offset Current-Max (IIO) | 0.1μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LME49723MAX/NOPB Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. There are two types of operational amplifiers in this circuit. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. There have been a total of 8 terminations over the past year. I would like to remind you that this buffer op amp should be powered by an 15V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. The op amp ic has an array of 8 pins on it. In terms of input offset voltage, operational amplifier rates 1mV. The mounting type that is recommended for this electrical part is Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 6.7mA . There should be no change in the voltage gain at 105dB. The linear amplifier consists of 2 different elements in total. The operating supply voltage of instrumentation amplifier is rated 17V voltage. For packing the buffer amplifier, the TR-axis is adopted.
LME49723MAX/NOPB Features
supply voltage of 15V
105dB voltage gain
LME49723MAX/NOPB Applications
There are a lot of Texas Instruments LME49723MAX/NOPB Instrumentational OP Amps applications.
- Displayers for aircraft and air transportation control systems
- Hand-held batteries
- Multimedia playback equipment
- Large motor controllers
- Signal transformation
- Image computer boards
- Portable electronic products powered by batteries
- Power control
- Signal operation
- Division circuits
