LME49724MR/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-PowerSOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | LME49724 |
| Output Type | Differential |
| Operating Supply Voltage | -18V |
| Number of Channels | 1 |
| Operating Supply Current | 10mA |
| Nominal Supply Current | 10mA |
| Output Current | 80mA |
| Slew Rate | 18V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Audio |
| Common Mode Rejection Ratio | 95 dB |
| Current - Input Bias | 60nA |
| Voltage - Supply, Single/Dual (±) | 5V~36V ±2.5V~18V |
| Output Current per Channel | 80mA |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 200μV |
| Bandwidth | 50MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 50000 kHz |
| Voltage Gain | 125dB |
| Average Bias Current-Max (IIB) | 0.2μA |
| Power Supply Rejection Ratio (PSRR) | 95dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.2μA |
| Programmable Power | NO |
| Dual Supply Voltage | 15V |
| Input Offset Current-Max (IIO) | 0.065μA |
| Load Impedance | 600Ohm |
| Height | 1.7mm |
| Length | 4.89mm |
| Width | 3.9mm |
| Thickness | 1.48mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LME49724MR/NOPB Overview
The linear amplifier is packaged in a 8-PowerSOIC (0.154, 3.90mm Width) case. Audio-type instrumentation amplifiers are used in this application. A Tube case is used to deliver the buffer op amp. During the past two weeks, there have been close to 8 terminations. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. There are 8 pins on this chip. Op amp rates 200μV as input offset voltage. This electrical part should be mounted using type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureA supply current of 10mA can be used to operate this linear amplifier. The voltage gain should stay at 125dB. 1 channels are available on the instrumentation amplifier. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Differential signals. The operating supply voltage of the buffer op amp is rated at -18V.
LME49724MR/NOPB Features
supply voltage of 15V
125dB voltage gain
Output Type: Differential
LME49724MR/NOPB Applications
There are a lot of Texas Instruments LME49724MR/NOPB Instrumentational OP Amps applications.
- E-book readers
- Addition operation circuits
- Polarized electrodes
- Video amplifiers
- Radiation thermometry transducers
- Precision measurement
- Signal operation
- Wireless base stations
- PDA
- earphone
