LME49726MYX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LME49726 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Operating Supply Current | 700μA |
| Output Current | 350mA |
| Supply Current-Max | 1.1mA |
| Slew Rate | 3.7V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Audio |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 0.2pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Output Current per Channel | 350mA |
| Supply Type | Single |
| Input Offset Voltage (Vos) | 2.25mV |
| Gain Bandwidth Product | 6.25MHz |
| Unity Gain BW-Nom | 6250 kHz |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 500μV |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Wideband | NO |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LME49726MYX/NOPB Overview
Op amp is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case. This is a Audio type op amp. A Tape & Reel (TR) case is used for delivering the op amp. There have been a total of 8 terminations over the past year. Buffer amplifier has a total of 8 pins on it. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 8 pins are located on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 2.25mV voltage. For this electrical component, Surface Mount is the recommended mounting type. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . As long as the supply current of the chip does not exceed 700μA, this op amp ic can operate. Op amp is a member of the 120dB's 120dB family. The total number of elements in this buffer amplifier is 2. The operating supply voltage of instrumentation amplifier is rated 5V voltage. An buffer amplifier is packed in a TR-shape according to the design.
LME49726MYX/NOPB Features
8 Pins
supply voltage of 5V
120dB voltage gain
LME49726MYX/NOPB Applications
There are a lot of Texas Instruments LME49726MYX/NOPB Instrumentational OP Amps applications.
- Displayers for aircraft and air transportation control systems
- Mobile phone
- Biopotential
- Cinema or auditorium audio system
- Oscilloscopes
- Automation control systems
- Multiplication circuits
- Proportional operation circuits
- Wireless base stations
- Signal operation
