LME49860NA/NOPB
| Parameters | |
|---|---|
| Weight | 113.398093g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | RAIL |
| Number of Functions | 2 |
| Supply Voltage | 18V |
| Base Part Number | LME49860 |
| Pin Count | 8 |
| Operating Supply Voltage | 22V |
| Number of Elements | 2 |
| Operating Supply Current | 10.5mA |
| Nominal Supply Current | 13mA |
| Output Current | 37mA |
| Slew Rate | 20V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Audio |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 10nA |
| Voltage - Supply, Single/Dual (±) | 5V~44V ±2.5V~22V |
| Output Current per Channel | 37mA |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 140μV |
| Gain Bandwidth Product | 55MHz |
| Neg Supply Voltage-Nom (Vsup) | -18V |
| Unity Gain BW-Nom | 55000 kHz |
| Voltage Gain | 140dB |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| Programmable Power | NO |
| Dual Supply Voltage | 18V |
| Wideband | NO |
| Load Impedance | 2kOhm |
| Height | 3.3mm |
| Length | 9.27mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
LME49860NA/NOPB Overview
There is a 8-DIP (0.300, 7.62mm) case package that contains the instrumentation amplifiers. Buffer amps of this type are called Audio-types. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be 8 terminations in the next few months. In this case, there are 8 pins on the board. Please take in mind that op amp should be run at 18V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 140μV. For this electrical component, Through Hole is the recommended mounting type. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 10.5mA and 10 . It is recommended to keep the voltage gain at 140dB at all times. 2 elements make up the design of this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 22V voltage. A RAIL-shaped amplifier is used to pack the buffer amps.
LME49860NA/NOPB Features
8 Pins
supply voltage of 18V
140dB voltage gain
LME49860NA/NOPB Applications
There are a lot of Texas Instruments LME49860NA/NOPB Instrumentational OP Amps applications.
- Laptop
- Radar
- Multimedia playback equipment
- High input resistance broadband
- Video data acquisition
- Strain gauges
- E-book readers
- Comparator
- Micro signal measurement
- High-frequency data acquisition systems
