LMH6321TS/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-8, D2Pak (7 Leads + Tab), TO-263CA |
| Number of Pins | 7 |
| Weight | 4.535924g |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | LMH6321 |
| Pin Count | 4 |
| Operating Supply Voltage | 18V |
| Number of Channels | 1 |
| Nominal Supply Current | 11mA |
| Output Current | 300mA |
| Current - Supply | 14.9mA |
| Slew Rate | 2900V/μs |
| Amplifier Type | Buffer |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 2μA |
| Voltage - Supply, Single/Dual (±) | 5V~32V ±2.5V~16V |
| Output Current per Channel | 295mA |
| Input Offset Voltage (Vos) | 52mV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 0.052dB |
| Power Supply Rejection Ratio (PSRR) | 58dB |
| Voltage - Input Offset | 4mV |
| -3db Bandwidth | 110MHz |
| Schmitt Trigger Input | No |
| Height | 4.65mm |
| Length | 10.1mm |
| Width | 8.89mm |
| Thickness | 4.44mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LMH6321TS/NOPB Overview
Packaged in a TO-263-8, D2Pak (7 Leads + Tab), TO-263CA case, the buffer op amp is ready to use. Buffer-type instrumentation amplifiers are used in this application. A Tube case is used to deliver the buffer op amp. The number of terminations is approaching the 7 mark. A total of 4 pins are located on this board. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. Linear amplifier includes 7 pins. There is an input offset voltage of 52mV for this buffer op amp. This electrical part should be mounted using type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . There should be no change in the voltage gain. On the buffer amps, there are 1 channels that can be used. The operating supply voltage of instrumentation amplifier is rated 18V voltage. As a recommendation, this electronic component should be used with a power supply that can deliver 14.9mA.
LMH6321TS/NOPB Features
4 Pins
supply voltage of 15V
0.052dB voltage gain
LMH6321TS/NOPB Applications
There are a lot of Texas Instruments LMH6321TS/NOPB Instrumentational OP Amps applications.
- Proportional operation circuits
- Polarized electrodes
- Wireless base stations
- Portable docking station
- Displayers for aircraft and air transportation control systems
- Tablets
- Video amplifiers
- Division circuits
- High input resistance broadband
- Mobile phone
