LMH6503MAX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | LMH® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 750kOhm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LMH6503 |
| Pin Count | 14 |
| Operating Supply Voltage | 9V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Number of Channels | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Nominal Supply Current | 50mA |
| Output Current | 90mA |
| Current - Supply | 37mA |
| Slew Rate | 1800V/μs |
| Amplifier Type | Variable Gain |
| Common Mode Rejection Ratio | 67 dB |
| Current - Input Bias | 11μA |
| Voltage - Supply, Single/Dual (±) | 5V~12V ±2.5V~6V |
| Input Offset Voltage (Vos) | 370mV |
| Gain Bandwidth Product | 100MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 70dB |
| Power Supply Rejection Ratio (PSRR) | 57dB |
| -3db Bandwidth | 135MHz |
| Dual Supply Voltage | 5V |
| Input Voltage Noise Density | 6.6nV/sqrt Hz |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMH6503MAX/NOPB Overview
A 14-SOIC (0.154, 3.90mm Width) case is used to package the op amp. An op amp ic of the Variable Gain type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 14 terminations this year. In total, there are 14 pins on this op amp ic. Please take in mind that op amp should be run at 5V. In total, the buffer amplifier consists of 14 pins. There is an input offset voltage of 370mV for this buffer op amp. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . There should be no change in the voltage gain. The op amp ic has 1 channels on it. A total of 1 elements are present in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 9V. As a result, it is recommended that a power supply of 37mA be used with this electronic part. The LMH? represents the op amp's series number. 750kOhm should be the range of resistance for the linear amplifier. The buffer op amp also uses a ANALOG CIRCUIT analog IC.
LMH6503MAX/NOPB Features
14 Pins
supply voltage of 5V
70dB voltage gain
Resistance of 750kOhm
LMH6503MAX/NOPB Applications
There are a lot of Texas Instruments LMH6503MAX/NOPB Instrumentational OP Amps applications.
- Wireless base stations
- Addition operation circuits
- Strain gauges
- Proportional operation circuits
- Fission chambers
- Test and measurement instruments
- Signal operation
- Ultrasound transducers
- Portable media players
- Automatic control
