LMH6503MT/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 140.30179mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | LMH® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 750kOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LMH6503 |
| Pin Count | 14 |
| Operating Supply Voltage | 9V |
| Supply Voltage-Max (Vsup) | 6V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Nominal Supply Current | 37mA |
| Output Current | 90mA |
| Max Supply Current | 50mA |
| Slew Rate | 1800V/μs |
| Amplifier Type | Variable Gain |
| Common Mode Rejection Ratio | 67 dB |
| Current - Input Bias | 11μA |
| Voltage - Supply, Single/Dual (±) | 5V~12V ±2.5V~6V |
| Output Current per Channel | 90mA |
| Input Offset Voltage (Vos) | 370mV |
| Bandwidth | 135MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 70dB |
| Power Supply Rejection Ratio (PSRR) | 57dB |
| Dual Supply Voltage | 5V |
| Input Voltage Noise Density | 6.6nV/sqrt Hz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMH6503MT/NOPB Overview
The linear amplifier is packaged in a 14-TSSOP (0.173, 4.40mm Width) case. The instrumentation amplifier in this picture is of the Variable Gain-type. There is a Tube case that is delivered with the instrumentation amplifiers. The number of terminations approaches 14. The total number of pins on linear amplifier is 14. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. It has 14 pins that make up the linear amplifier. There is an input offset voltage of 370mV for this buffer op amp. This electronic component is recommended to be mounted using the mounting type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . There should be no change in the voltage gain at 70dB. In total, there are 1 circuits on this buffer amplifier. There are 1 channels on the operational amplifiers. The operating supply voltage of the buffer op amp is rated at 9V. Instrumentation amplifiers are numbered by their LMH? series. Instrumentation amplifier resistance should remain within the range of 750kOhm. The other type of analog IC used in this op amp ic is known as ANALOG CIRCUIT.
LMH6503MT/NOPB Features
14 Pins
supply voltage of 5V
70dB voltage gain
Resistance of 750kOhm
LMH6503MT/NOPB Applications
There are a lot of Texas Instruments LMH6503MT/NOPB Instrumentational OP Amps applications.
- Strain gauges
- Signal filtering
- MP3
- Automatic control
- Logarithmic operation circuits
- Subtraction operation circuits
- Television
- Video computer boards
- Professional videography
- Band-stop filter
