LMH6514SQ/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Resistance | 1.12kOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LMH6514 |
| Pin Count | 16 |
| Output Type | Differential |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Operating Supply Current | 107mA |
| Nominal Supply Current | 124mA |
| Output Current | 20mA |
| Slew Rate | 1600 V/us |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Variable Gain |
| Common Mode Rejection Ratio | 81 dB |
| Voltage - Supply, Single/Dual (±) | 4V~5.25V |
| Input Offset Voltage (Vos) | 30mV |
| Voltage Gain | 30.3dB |
| Power Supply Rejection Ratio (PSRR) | 63dB |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Micropower | NO |
| -3db Bandwidth | 600MHz |
| Programmable Power | NO |
| Wideband | YES |
| Input Voltage Noise Density | 1.8nV/sqrt Hz |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMH6514SQ/NOPB Overview
In order to protect the op amps, a 16-WFQFN Exposed Pad case is used. There are two types of operational amplifiers in this circuit. A Tape & Reel (TR) case is used to deliver the buffer op amp. The number of terminations approaches 16. In total, there are 16 pins on this op amp ic. It is important to remember that this op amp should be operated at a voltage of 5V volts. It should be noted that this op amp is a type of Operational Amplifier device. 16 pins are included on the operational amplifiers. Regarding input offset voltage, buffer amplifier rates 30mV voltage. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . It is possible to operate this buffer amplifier from a supply current of 107mA . The voltage gain should stay at 30.3dB. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Differential signals. A total of 1 elements are present in this linear amplifier. For the packing of the instrumentation amplifier, TR is adopted. Op amp resistance should stay within the range of 1.12kOhm.
LMH6514SQ/NOPB Features
16 Pins
supply voltage of 5V
30.3dB voltage gain
Output Type: Differential
Resistance of 1.12kOhm
LMH6514SQ/NOPB Applications
There are a lot of Texas Instruments LMH6514SQ/NOPB Instrumentational OP Amps applications.
- Television broadcasting equipment
- Gaming industry
- Home audio systems
- Biopotential
- Communication device
- pH (acidity)
- Semiconductor detectors
- Switching amplifier
- Voltage regulation circuit
- Radiation thermometry transducers
