LMH6551MM/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LMH6551 |
| Pin Count | 8 |
| Output Type | Differential |
| Operating Supply Voltage | 6V |
| Number of Channels | 1 |
| Operating Supply Current | 12.5mA |
| Nominal Supply Current | 12.5mA |
| Output Current | 65mA |
| Slew Rate | 2400V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 4μA |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±1.5V~6V |
| Output Current per Channel | 65mA |
| Input Offset Voltage (Vos) | 6mV |
| Bandwidth | 370MHz |
| Gain Bandwidth Product | 350MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 370000 kHz |
| Voltage Gain | 70dB |
| Power Supply Rejection Ratio (PSRR) | 72dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 300MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMH6551MM/NOPB Overview
A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used to package the op amp. Voltage Feedback-type instrumentation amplifiers are used in this application. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. Linear amplifier has a total of 8 pins. It is important to remember that this op amp should be operated at a voltage of 5V volts. It should be noted that this op amp is a type of Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 6mV. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. Using a supply current of 12.5mA , this buffer op amp will be able to operate. 70dB should be the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels. This op amp ic outputs Differential signals, which is one of the many benefits it has. The operating supply voltage of instrumentation amplifier is rated 6V voltage. For the packing of the instrumentation amplifier, TR is adopted.
LMH6551MM/NOPB Features
8 Pins
supply voltage of 5V
70dB voltage gain
Output Type: Differential
LMH6551MM/NOPB Applications
There are a lot of Texas Instruments LMH6551MM/NOPB Instrumentational OP Amps applications.
- Subtraction operation circuits
- Proportional counter tubes
- Mobile phone
- Non-polarized electrodes
- Video computer boards
- Communication
- Portable docking station
- Wireless base stations
- Multiplication circuits
- Integrator circuits
