LMH6551QMME/NOPB

1 Channels 65mA per Channel 4μA 70 dB Instrumentational OP Amps 6V 3V~12V ±1.5V~6V LMH6551 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-LMH6551QMME/NOPB
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 143
Description: 1 Channels 65mA per Channel 4μA 70 dB Instrumentational OP Amps 6V 3V~12V ±1.5V~6V LMH6551 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tape & Reel (TR)
Series	Automotive, AEC-Q100
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Matte Tin (Sn)
Subcategory	Operational Amplifier
Packing Method	TR
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.65mm
Base Part Number	LMH6551
Pin Count	8
Output Type	Differential
Operating Supply Voltage	6V
Power Supplies	3.3/5/+-5V
Number of Channels	1
Number of Circuits	1
Nominal Supply Current	12.5mA
Output Current	65mA
Slew Rate	2400V/μs
Amplifier Type	Voltage Feedback
Common Mode Rejection Ratio	70 dB
Current - Input Bias	4μA
Voltage - Supply, Single/Dual (±)	3V~12V ±1.5V~6V
Output Current per Channel	65mA
Input Offset Voltage (Vos)	500μV
Bandwidth	370MHz
Gain Bandwidth Product	370MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Unity Gain BW-Nom	370000 kHz
Voltage Gain	70dB
Power Supply Rejection Ratio (PSRR)	71dB
Low-Offset	NO
Frequency Compensation	YES
Low-Bias	NO
Micropower	NO
-3db Bandwidth	300MHz
Max Frequency	20MHz
Programmable Power	NO
Height	1.07mm
Length	3mm
Width	3mm
Thickness	970μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

LMH6551QMME/NOPB Overview

Packaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. An op amp ic of the Voltage Feedback type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. The number of terminations approaches 8. A total of 8 pins are attached to buffer op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 8 pins are available on the instrumentation amplifier. Op amp rates 500μV as input offset voltage. This electronic component is recommended to be mounted using the mounting type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . 70dB should remain the voltage gain. There are 1 circuits on op amps. There are 1 channels on the operational amplifiers. On the output type, there are Differential different types of op amps. The operating supply voltage of the buffer op amp is rated at 6V. A TR-shaped amplifier is used to pack the buffer amps. Automotive, AEC-Q100 corresponds to the op amp's series.