LMH6551QMM/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LMH6551 |
| Pin Count | 8 |
| Output Type | Differential |
| Power Supplies | 3.3/5/+-5V |
| Number of Circuits | 1 |
| Output Current | 65mA |
| Current - Supply | 12.5mA |
| Min Input Voltage | 3V |
| Slew Rate | 2400V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 4μA |
| Max Input Voltage | 11V |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±1.5V~6V |
| Output Current per Channel | 65mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 370MHz |
| Gain Bandwidth Product | 370MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 370000 kHz |
| Voltage Gain | 70dB |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.6V |
| Settling Time | 18 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 300MHz |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -6.6V |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMH6551QMM/NOPB Overview
Packaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. An op amp of this type is a Voltage Feedback-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. The number of terminations is approaching the 8 mark. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. 8 pins are located on the operational amplifiers. Regarding input offset voltage, op amp rates 500μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. With regard to operating temperature, this op amp functions well at -40°C~125°C. 70dB should remain the voltage gain. There are 1 circuits on op amps. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Differential signals. For the packing of the instrumentation amplifier, TR is adopted. It is recommended that you use an 12.5mA power supply with this electrical part in order for it to operate correctly. Automotive, AEC-Q100 corresponds to linear amplifier's series.
LMH6551QMM/NOPB Features
8 Pins
supply voltage of 5V
70dB voltage gain
Output Type: Differential
LMH6551QMM/NOPB Applications
There are a lot of Texas Instruments LMH6551QMM/NOPB Instrumentational OP Amps applications.
- Image computer boards
- Cinema or auditorium audio system
- Signal amplification
- Communication
- Signal operation
- Industrial control system
- Weak signal detection
- Video conversion and routing
- High-frequency data acquisition systems
- Automatic control
