LMH6552MA/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 142.994995mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | LMH®, PowerWise® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 15Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LMH6552 |
| Pin Count | 8 |
| Output Type | Differential |
| Operating Supply Voltage | 9V |
| Number of Channels | 1 |
| Operating Supply Current | 22.5mA |
| Nominal Supply Current | 22.5mA |
| Output Current | 80mA |
| Max Supply Current | 25mA |
| Slew Rate | 3800V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 60μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~12V ±2.25V~6V |
| Output Current per Channel | 80mA |
| Supply Type | Dual, Single |
| Input Offset Voltage (Vos) | 16.5mV |
| Bandwidth | 1.5 GHz |
| Gain Bandwidth Product | 1.5 GHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1500000 kHz |
| Voltage Gain | 0dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.6V |
| Voltage - Input Offset | 1.5mV |
| Gain | 1 dB |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 480MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMH6552MA/NOPB Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. Op amps are Current Feedback types of amplifier on the chip. In the case of Tube cases, linear amplifier will be delivered. It is estimated that there will be 8 terminations in the next few months. In total, there are 8 pins on this op amp ic. I would like to remind you that this buffer op amp should be powered by an 5V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. The buffer op amp includes 8 pins. With regards to the offset voltage of the input, buffer amplifier is rated at 16.5mV. For this electrical component, Surface Mount is the recommended mounting type. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. Using a supply current of 22.5mA , this buffer op amp will be able to operate. 0dB should be the voltage gain. 1 channels are available on the instrumentation amplifier. One of its many advantages is that buffer op amp outputs Differential signals. The operating supply voltage of instrumentation amplifier is rated 9V voltage. Instrumentation amplifiers are numbered by their LMH?, PowerWise? series. It is important to keep the resistance within the 15Ohm range of the op amps.
LMH6552MA/NOPB Features
8 Pins
supply voltage of 5V
0dB voltage gain
Output Type: Differential
Resistance of 15Ohm
LMH6552MA/NOPB Applications
There are a lot of Texas Instruments LMH6552MA/NOPB Instrumentational OP Amps applications.
- Professional videography
- Biopotential
- Computer workstations
- Power control
- Semiconductor detectors
- PDA
- Automotive sensors
- Proportional counter tubes
- Subtraction operation circuits
- Radar
