LMH6553MRE/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-PowerSOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | LMH®, PowerWise® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Resistance | 15Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LMH6553 |
| Output Type | Differential |
| Operating Supply Voltage | 9V |
| Number of Channels | 1 |
| Operating Supply Current | 29.1mA |
| Nominal Supply Current | 33mA |
| Output Current | 120mA |
| Max Supply Current | 37mA |
| Slew Rate | 2300V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 82 dB |
| Current - Input Bias | 50μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~12V ±2.25V~6V |
| Output Current per Channel | 120mA |
| Bandwidth | 900MHz |
| Gain Bandwidth Product | 875MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 900000 kHz |
| Voltage Gain | 0.069dB |
| Average Bias Current-Max (IIB) | 95μA |
| Power Supply Rejection Ratio (PSRR) | 87dB |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.6V |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 315MHz |
| Bias Current-Max (IIB) @25C | 95μA |
| Programmable Power | NO |
| Height | 1.7mm |
| Length | 4.89mm |
| Width | 3.9mm |
| Thickness | 1.48mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMH6553MRE/NOPB Overview
There is a 8-PowerSOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. Current Feedback-type instrumentation amplifiers are used in this application. A Tape & Reel (TR) case is used for delivering the op amp. In recent months, the number of terminations has approached 8. Please take in mind that this instrumentation amplifier should be run at 5V. Instrumentation amplifier is a part of Operational Amplifier. Linear amplifier includes 8 pins. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, op amp ranges -40°C~125°C. A supply current of 29.1mA can be used to operate this linear amplifier. The voltage gain should stay at 0.069dB. Buffer op amp is equipped with 1 channels on the device. One of its many advantages is that buffer op amp outputs Differential signals. The operating supply voltage of instrumentation amplifier is rated 9V voltage. TR is adopted to pack the instrumentation amplifier. The LMH?, PowerWise? represents the op amp's series number. It is important to keep the resistance within the 15Ohm range of the linear amplifier.
LMH6553MRE/NOPB Features
supply voltage of 5V
0.069dB voltage gain
Output Type: Differential
Resistance of 15Ohm
LMH6553MRE/NOPB Applications
There are a lot of Texas Instruments LMH6553MRE/NOPB Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Medical instruments
- Power control
- Biopotential
- Laptop
- Semiconductor detectors
- Information processing
- pH (acidity)
- Portable media players
- Exponential operation circuits
