LMH6553MR/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-PowerSOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | LMH®, PowerWise® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 15Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LMH6553 |
| Output Type | Differential |
| Operating Supply Voltage | 9V |
| Number of Channels | 1 |
| Operating Supply Current | 29.1mA |
| Nominal Supply Current | 33mA |
| Output Current | 120mA |
| Slew Rate | 2300V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 82 dB |
| Current - Input Bias | 50μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~12V ±2.25V~6V |
| Output Current per Channel | 120mA |
| Bandwidth | 900MHz |
| Gain Bandwidth Product | 900MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 900000 kHz |
| Voltage Gain | 0.069dB |
| Average Bias Current-Max (IIB) | 95μA |
| Power Supply Rejection Ratio (PSRR) | 87dB |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.6V |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 315MHz |
| Bias Current-Max (IIB) @25C | 95μA |
| Programmable Power | NO |
| Height | 1.7mm |
| Length | 4.89mm |
| Width | 3.9mm |
| Thickness | 1.48mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMH6553MR/NOPB Overview
The linear amplifier is packaged in a 8-PowerSOIC (0.154, 3.90mm Width) case. Current Feedback-type instrumentation amplifiers are used in this application. Instrumentation amplifier is delivered in a Tube case. In recent months, the number of terminations has approached 8. This linear amplifier should be powered by an 5V battery. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. An 8-pin op amp ic is included in the package. This electronic part is best mounted with type Surface Mount. With regard to operating temperature, op amp ranges -40°C~125°C. Using a supply current of 29.1mA , this buffer op amp will be able to operate. Maintain 0.069dB as the voltage gain. The op amp ic has 1 channels on it. As one of the many benefits of this buffer amplifier, it puts out Differential signals, which is one of the many benefits it offers. The operating supply voltage of instrumentation amplifier is rated 9V voltage. This buffer amplifier is assigned within the LMH?, PowerWise? series by its manufacturer. During testing, the instrumentation amplifier resistance should remain within a range of 15Ohm.
LMH6553MR/NOPB Features
supply voltage of 5V
0.069dB voltage gain
Output Type: Differential
Resistance of 15Ohm
LMH6553MR/NOPB Applications
There are a lot of Texas Instruments LMH6553MR/NOPB Instrumentational OP Amps applications.
- Power transmission
- Automotive sensors
- Displayers for aircraft and air transportation control systems
- Medical instruments
- Tablets
- Industrial applications including automation
- Power control
- RF cable systems
- High/low-pass filter circuit
- Video data acquisition
