LMH6553SDE/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | LMH®, PowerWise® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 15Ohm |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LMH6553 |
| Output Type | Differential |
| Operating Supply Voltage | 9V |
| Number of Channels | 1 |
| Operating Supply Current | 29.1mA |
| Nominal Supply Current | 29.1mA |
| Output Current | 120mA |
| Slew Rate | 2300V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 82 dB |
| Current - Input Bias | 50μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~12V ±2.25V~6V |
| Output Current per Channel | 120mA |
| Supply Type | Single |
| Bandwidth | 900MHz |
| Gain Bandwidth Product | 900MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 900000 kHz |
| Voltage Gain | 0.069dB |
| Average Bias Current-Max (IIB) | 95μA |
| Power Supply Rejection Ratio (PSRR) | 87dB |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.6V |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 315MHz |
| Bias Current-Max (IIB) @25C | 95μA |
| Programmable Power | NO |
| Height | 800μm |
| Length | 3mm |
| Width | 2.5mm |
| Thickness | 800μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMH6553SDE/NOPB Overview
Packaging for the buffer amplifier is in the form of a 8-WFDFN Exposed Pad case. There are two types of operational amplifiers in this circuit. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. The number of terminations approaches 8. I would like to remind you that this buffer op amp should be powered by an 5V battery. It should be noted that this op amp is a type of Operational Amplifier device. There are 8 pins on this chip. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 29.1mA and 10 . Op amp is a member of the 0.069dB's 0.069dB family. 1 channels are available on the instrumentation amplifier. A benefit of this op amp ic is that it outputs Differential signals, which is one of the many advantages it has to offer. The operating supply voltage of instrumentation amplifier is rated 9V voltage. TR is adopted to pack the instrumentation amplifier. Instrumentation amplifiers are numbered by their LMH?, PowerWise? series. In order for the buffer amplifier resistance to remain within the 15Ohm range, the device should be tested.
LMH6553SDE/NOPB Features
supply voltage of 5V
0.069dB voltage gain
Output Type: Differential
Resistance of 15Ohm
LMH6553SDE/NOPB Applications
There are a lot of Texas Instruments LMH6553SDE/NOPB Instrumentational OP Amps applications.
- Voltage regulation circuit
- Laptop
- High/low-pass filter circuit
- Exponential operation circuits
- single/dual op amp sum and difference circuits
- Digital cameras
- Thermocouples
- Portable media players
- Industrial applications including automation
- Power control
