LMH6553SD/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | LMH®, PowerWise® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 15Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LMH6553 |
| Output Type | Differential |
| Operating Supply Voltage | 9V |
| Number of Channels | 1 |
| Operating Supply Current | 29.1mA |
| Nominal Supply Current | 33mA |
| Output Current | 120mA |
| Slew Rate | 2300V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 82 dB |
| Current - Input Bias | 50μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~12V ±2.25V~6V |
| Output Current per Channel | 120mA |
| Bandwidth | 900MHz |
| Gain Bandwidth Product | 900MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 900000 kHz |
| Voltage Gain | 0.069dB |
| Average Bias Current-Max (IIB) | 95μA |
| Power Supply Rejection Ratio (PSRR) | 87dB |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.6V |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 315MHz |
| Bias Current-Max (IIB) @25C | 95μA |
| Programmable Power | NO |
| Height | 800μm |
| Length | 3mm |
| Width | 2.5mm |
| Thickness | 800μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMH6553SD/NOPB Overview
It is packaged in an 8-WFDFN Exposed Pad-case that protects the operational amplifiers from damage. Op amps are Current Feedback types of amplifier on the chip. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. There have been a total of 8 terminations over the past year. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. A total of 8 pins are present on the instrumentation amplifier. This electronic component is recommended to be mounted using the mounting type Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. Operational amplifier can operate supply current at 29.1mA. 0.069dB should remain the voltage gain. There are a total of 1 channels available on the op amps. This op amp ic outputs Differential signals, which is one of the many benefits it has. The operating supply voltage of the buffer op amp is rated at 9V. An buffer amplifier is packed in a TR-shape according to the design. As the name implies, LMH?, PowerWise? refers to the series of the buffer op amp. Instrumentation amplifier resistance should remain within the range of 15Ohm.
LMH6553SD/NOPB Features
supply voltage of 5V
0.069dB voltage gain
Output Type: Differential
Resistance of 15Ohm
LMH6553SD/NOPB Applications
There are a lot of Texas Instruments LMH6553SD/NOPB Instrumentational OP Amps applications.
- Polarized electrodes
- Power control
- Instrumentation
- Voltage regulation circuit
- Radiation thermometry transducers
- Wireless base stations
- E-book readers
- Proportional operation circuits
- Biopotential
- pH (acidity)
