LMH6601MG/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Weight | 4.535924g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | LMH6601 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 1 |
| Operating Supply Current | 9.6mA |
| Nominal Supply Current | 9.6mA |
| Output Current | 100mA |
| Slew Rate | 275V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 56 dB |
| Current - Input Bias | 5pA |
| Voltage - Supply, Single/Dual (±) | 2.4V~5.5V ±1.2V~2.75V |
| Output Current per Channel | 180mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 155MHz |
| Unity Gain BW-Nom | 150000 kHz |
| Voltage Gain | 66dB |
| Average Bias Current-Max (IIB) | 0.00005μA |
| Power Supply Rejection Ratio (PSRR) | 55dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | YES |
| Micropower | NO |
| -3db Bandwidth | 250MHz |
| Bias Current-Max (IIB) @25C | 0.00005μA |
| Programmable Power | NO |
| Input Offset Current-Max (IIO) | 0.000025μA |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMH6601MG/NOPB Overview
It is packaged in an 6-TSSOP, SC-88, SOT-363-case that protects the operational amplifiers from damage. This is a Voltage Feedback type op amp. Linear amplifier is delivered in a Tape & Reel (TR) case. In recent months, the number of terminations has approached 6. Please take in mind that op amp should be run at 2.7V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. The buffer op amp includes 6 pins. Op amp ic rates 1mV for input offset voltage. This electronic component is recommended to be mounted using the mounting type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~85°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 9.6mA and 10 . The voltage gain should stay at 66dB. Buffer op amp is equipped with 1 channels on the device. On the output type, there are Rail-to-Rail different types of op amps. The operating supply voltage of instrumentation amplifier is rated 3.3V voltage. It is used TR to pack the op amps.
LMH6601MG/NOPB Features
supply voltage of 2.7V
66dB voltage gain
Output Type: Rail-to-Rail
LMH6601MG/NOPB Applications
There are a lot of Texas Instruments LMH6601MG/NOPB Instrumentational OP Amps applications.
- High-frequency data acquisition systems
- Oscilloscopes
- Multiplication circuits
- Digital cameras
- Video data acquisition
- Power transmission
- Radar
- Portable electronic products powered by batteries
- Band-pass filter
- Comparator
