LMH6601MGX/NOPB
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | LMH6601 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 9.6mA |
| Nominal Supply Current | 9.6mA |
| Output Current | 100mA |
| Slew Rate | 275V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 56 dB |
| Current - Input Bias | 5pA |
| Voltage - Supply, Single/Dual (±) | 2.4V~5.5V ±1.2V~2.75V |
| Output Current per Channel | 180mA |
| Input Offset Voltage (Vos) | 1mV |
| Gain Bandwidth Product | 155MHz |
| Unity Gain BW-Nom | 150000 kHz |
| Voltage Gain | 66dB |
| Average Bias Current-Max (IIB) | 0.00005μA |
| Power Supply Rejection Ratio (PSRR) | 55dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | YES |
| Micropower | NO |
| -3db Bandwidth | 250MHz |
| Bias Current-Max (IIB) @25C | 0.00005μA |
| Programmable Power | NO |
| Wideband | YES |
| Input Offset Current-Max (IIO) | 0.000025μA |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
LMH6601MGX/NOPB Overview
There is a 6-TSSOP, SC-88, SOT-363 case package that contains the instrumentation amplifiers. An op amp of this type is a Voltage Feedback-type. A Tape & Reel (TR) case is used to deliver the buffer op amp. During the past two weeks, there have been close to 6 terminations. Please take in mind that this instrumentation amplifier should be run at 2.7V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. An 6-pin op amp ic is included in the package. As far as the input offset voltage is concerned, linear amplifier rates at 1mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . Using an 9.6mA supply current, this operational amplifier ics can be operated. Keeping the voltage gain at 66dB is the best course of action. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The buffer op amp is rated for an operating voltage of 1 when it comes to the power supply. To pack the operational amplifier ics, TR is adopted as the packing method.
LMH6601MGX/NOPB Features
supply voltage of 2.7V
66dB voltage gain
Output Type: Rail-to-Rail
LMH6601MGX/NOPB Applications
There are a lot of Texas Instruments LMH6601MGX/NOPB Instrumentational OP Amps applications.
- Industrial applications including automation
- Mobile phone
- Communication
- Active probe
- Commercial audio systems
- Computer workstations
- Communication device
- Image computer boards
- Addition operation circuits
- Cinema or auditorium audio system
