LMH6609MF/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | VIP10™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | LMH6609 |
| Pin Count | 5 |
| Number of Channels | 1 |
| Operating Supply Current | 7mA |
| Nominal Supply Current | 7mA |
| Output Current | 90mA |
| Slew Rate | 1400V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 67 dB |
| Current - Input Bias | 2μA |
| Voltage - Supply, Single/Dual (±) | 6V~12V ±3V~6V |
| Output Current per Channel | 90mA |
| Input Offset Voltage (Vos) | 800μV |
| Bandwidth | 900MHz |
| Gain Bandwidth Product | 260MHz |
| Neg Supply Voltage-Nom (Vsup) | -3.3V |
| Unity Gain BW-Nom | 150000 kHz |
| Average Bias Current-Max (IIB) | 3μA |
| Power Supply Rejection Ratio (PSRR) | 67dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.6V |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 110MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Neg Supply Voltage-Max (Vsup) | -6.6V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMH6609MF/NOPB Overview
Op amp is packaged in SC-74A, SOT-753 case. Buffer amps of this type are called Voltage Feedback-types. A Tape & Reel (TR) case is used to deliver the buffer op amp. It is estimated that there will be 5 terminations in the next few months. The total number of pins on linear amplifier is 5. It would be helpful if you could remember that this op amp ic should be powered by an 3.3V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. Linear amplifier includes 5 pins. There is an input offset voltage of 800μV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. You can run this op amp ic on 7mA . 1 channels are available on the instrumentation amplifier. An buffer amplifier is packed in a TR-shape according to the design. The VIP10? represents the op amp's series number.
LMH6609MF/NOPB Features
5 Pins
supply voltage of 3.3V
LMH6609MF/NOPB Applications
There are a lot of Texas Instruments LMH6609MF/NOPB Instrumentational OP Amps applications.
- Car stereo
- Medical imaging
- Image computer boards
- Power generator
- Weak signal detection
- High-frequency data acquisition systems
- Hand-held batteries
- Blood pressure sensors
- Band-stop filter
- Mobile phone
