banner_page

LMH6611MKE/NOPB

1 Channels 120mA per Channel 6.5μA 81 dB Instrumentational OP Amps 2.7V~11V ±1.35V~5.5V LMH6611 SOT-23-6 Thin, TSOT-23-6


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LMH6611MKE/NOPB
  • Package: SOT-23-6 Thin, TSOT-23-6
  • Datasheet: -
  • Stock: 636
  • Description: 1 Channels 120mA per Channel 6.5μA 81 dB Instrumentational OP Amps 2.7V~11V ±1.35V~5.5V LMH6611 SOT-23-6 Thin, TSOT-23-6(Kg)

Details

Tags

Parameters
Operating Supply Current 3.3mA
Nominal Supply Current 3.2mA
Output Current 100mA
Slew Rate 460V/μs
Amplifier Type General Purpose
Common Mode Rejection Ratio 81 dB
Current - Input Bias 6.5μA
Voltage - Supply, Single/Dual (±) 2.7V~11V ±1.35V~5.5V
Output Current per Channel 120mA
Input Offset Voltage (Vos) 74μV
Bandwidth 345MHz
Gain Bandwidth Product 135MHz
Voltage Gain 103dB
Power Supply Rejection Ratio (PSRR) 81dB
Settling Time 67 ns
-3db Bandwidth 365MHz
Dual Supply Voltage 5V
Consumer IC Type VIDEO AMPLIFIER
Height 1.1mm
Length 2.9mm
Width 1.6mm
Thickness 870μm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SOT-23-6 Thin, TSOT-23-6
Number of Pins 6
Operating Temperature -40°C~125°C
Packaging Tape & Reel (TR)
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
ECCN Code EAR99
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Terminal Pitch 0.95mm
Base Part Number LMH6611
Output Type Rail-to-Rail
Max Output Current 100mA
Number of Channels 1

LMH6611MKE/NOPB Overview


A SOT-23-6 Thin, TSOT-23-6 case is used to package the op amp. There are two types of operational amplifiers in this circuit. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. During the past two weeks, there have been close to 6 terminations. 6 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 74μV. This electronic part is best mounted with type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. This op amp can operate from a supply current at 3.3mA. The voltage gain should stay at 103dB. There are 1 channels on the operational amplifiers. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. Using the VIDEO AMPLIFIER column, it is possible to sort by the consumer IC type of the electronic ic chip.

LMH6611MKE/NOPB Features


103dB voltage gain
Output Type: Rail-to-Rail

LMH6611MKE/NOPB Applications


There are a lot of Texas Instruments LMH6611MKE/NOPB Instrumentational OP Amps applications.

  • Addition operation circuits
  • Thermocouples
  • Integrator circuits
  • Information processing
  • Hand-held batteries
  • Switching amplifier
  • Inverse/same-phase proportional circuit
  • Communication device
  • Division circuits
  • Tablets

Write a review

Note: HTML is not translated!
    Bad           Good