LMH6618MKE/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | LMH6618 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 1.35mA |
| Nominal Supply Current | 1.25mA |
| Output Current | 35mA |
| Slew Rate | 57V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 81 dB |
| Current - Input Bias | 1.5μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~11V ±1.35V~5.5V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 65MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 71000 kHz |
| Voltage Gain | 100dB |
| Power Supply Rejection Ratio (PSRR) | 64dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 140MHz |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -5.5V |
| Input Offset Current-Max (IIO) | 0.27μA |
| Height | 1.1mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 870μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMH6618MKE/NOPB Overview
It is packaged in an SOT-23-6 Thin, TSOT-23-6-case that protects the operational amplifiers from damage. This is a Voltage Feedback type op amp. Linear amplifier is delivered in a Tape & Reel (TR) case. A total of 6 terminations have been reported in the past few weeks. A total of 6 pins are located on this board. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. It has 6 pins that make up the linear amplifier. In terms of the input offset voltage, instrumentation amplifier rates at 100μV. Surface Mount is the recommended mounting type of operational amplifiers. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. You can run this op amp ic on 1.35mA . 100dB should be the voltage gain. The op amp ic has 1 channels on it. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. As a result of this, the buffer amplifier is packed in TR.
LMH6618MKE/NOPB Features
6 Pins
supply voltage of 5V
100dB voltage gain
Output Type: Rail-to-Rail
LMH6618MKE/NOPB Applications
There are a lot of Texas Instruments LMH6618MKE/NOPB Instrumentational OP Amps applications.
- Non-polarized electrodes
- Video computer boards
- Integrator circuits
- Voltage regulation circuit
- Industrial applications including automation
- Portable media players
- RF cable systems
- Wireless base stations
- Large motor controllers
- High speed sample
