LMH6619MA/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LMH6619 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Operating Supply Current | 1.45mA |
| Nominal Supply Current | 1.25mA |
| Output Current | 35mA |
| Slew Rate | 57V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 81 dB |
| Current - Input Bias | 1.5μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~11V ±1.35V~5.5V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 130MHz |
| Gain Bandwidth Product | 58MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 63000 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 1.9μA |
| Power Supply Rejection Ratio (PSRR) | 64dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 140MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMH6619MA/NOPB Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. A Voltage Feedback-type buffer amplifier is shown here. A Tube case is used to deliver the buffer op amp. There have been a total of 8 terminations over the past year. Buffer amplifier has a total of 8 pins on it. Please take in mind that op amp should be run at 5V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. A total of 8 pins are present on the instrumentation amplifier. As far as the input offset voltage is concerned, linear amplifier rates at 100μV. This electronic part is recommended for mounting type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. An 1.45mA volt supply current is needed for this linear amplifier to operate. Op amp is a member of the 100dB's 100dB family. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. For the operating supply voltage of the op amp ic, there is a rating of 2.
LMH6619MA/NOPB Features
8 Pins
supply voltage of 5V
100dB voltage gain
Output Type: Rail-to-Rail
LMH6619MA/NOPB Applications
There are a lot of Texas Instruments LMH6619MA/NOPB Instrumentational OP Amps applications.
- Home audio systems
- Image computer boards
- Power transmission
- Video conversion and routing
- High speed sample
- Biopotential
- Medical instruments
- Non-polarized electrodes
- Radar
- Displayers for aircraft and air transportation control systems
