LMH6619MAX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LMH6619 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Operating Supply Current | 1.45mA |
| Nominal Supply Current | 1.25mA |
| Output Current | 35mA |
| Slew Rate | 57V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 81 dB |
| Current - Input Bias | 1.5μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~11V ±1.35V~5.5V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 100μV |
| Gain Bandwidth Product | 58MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 63000 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 1.9μA |
| Power Supply Rejection Ratio (PSRR) | 64dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 140MHz |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -5.5V |
| Wideband | YES |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMH6619MAX/NOPB Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the Voltage Feedback-type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. The number of terminations approaches 8. In this case, there are 8 pins on the board. Please take in mind that this instrumentation amplifier should be run at 5V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 8 pins are located on the operational amplifiers. There is an input offset voltage of 100μV for this buffer op amp. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using an 1.45mA supply current, this operational amplifier ics can be operated. The voltage gain should stay at 100dB. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The buffer op amp is rated for an operating voltage of 2 when it comes to the power supply. TR is adopted to pack the instrumentation amplifier.
LMH6619MAX/NOPB Features
8 Pins
supply voltage of 5V
100dB voltage gain
Output Type: Rail-to-Rail
LMH6619MAX/NOPB Applications
There are a lot of Texas Instruments LMH6619MAX/NOPB Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Ultrasound transducers
- ECG equipment
- earphone
- Home audio systems
- Division circuits
- Semiconductor detectors
- Band-stop filter
- Signal amplification
- Communication
