Parameters |
Lifecycle Status |
NRND (Last Updated: 4 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
JESD-609 Code |
e0 |
Part Status |
Not For New Designs |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Subcategory |
Operational Amplifier |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
235 |
Number of Functions |
1 |
Supply Voltage |
2.5V |
Base Part Number |
LMH6624 |
Pin Count |
8 |
Operating Supply Voltage |
9V |
Number of Channels |
1 |
Operating Supply Current |
12mA |
Nominal Supply Current |
12mA |
Output Current |
100mA |
Max Supply Current |
16mA |
Slew Rate |
400V/μs |
Amplifier Type |
Voltage Feedback |
Common Mode Rejection Ratio |
90 dB |
Current - Input Bias |
13μA |
Voltage - Supply, Single/Dual (±) |
5V~12V ±2.5V~6V |
Output Current per Channel |
100mA |
Input Offset Voltage (Vos) |
100μV |
Bandwidth |
1.5 GHz |
Neg Supply Voltage-Nom (Vsup) |
-2.5V |
Unity Gain BW-Nom |
1800000 kHz |
Voltage Gain |
81dB |
Average Bias Current-Max (IIB) |
25μA |
Power Supply Rejection Ratio (PSRR) |
82dB |
Low-Offset |
YES |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
6.6V |
Low-Bias |
NO |
Micropower |
NO |
-3db Bandwidth |
95MHz |
Bias Current-Max (IIB) @25C |
20μA |
Programmable Power |
NO |
Dual Supply Voltage |
3V |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
LMH6624MA Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. The instrumentation amplifier in this picture is of the Voltage Feedback-type. A Tube case is used for delivering the op amp. We are approaching the 8h termination of the year. There are a total of 8 pins on this op amp. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 2.5V. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. In total, the buffer amplifier consists of 8 pins. As far as the input offset voltage is concerned, linear amplifier rates at 100μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 12mA and 10 . Keeping the voltage gain at 81dB is the best course of action. Op amp ic has 1 channels. The operating supply voltage of instrumentation amplifier is rated 9V voltage.
LMH6624MA Features
8 Pins
supply voltage of 2.5V
81dB voltage gain
LMH6624MA Applications
There are a lot of Texas Instruments LMH6624MA Instrumentational OP Amps applications.
- Voltage regulation circuit
- Commercial audio systems
- Radar
- Band-pass filter
- ECG equipment
- Signal transformation
- Communication device
- Signal amplification
- Image computer boards
- Multimedia playback equipment