LMH6624MF/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Base Part Number | LMH6624 |
| Pin Count | 5 |
| Operating Supply Voltage | 9V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Nominal Supply Current | 12mA |
| Output Current | 100mA |
| Slew Rate | 400V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 13μA |
| Voltage - Supply, Single/Dual (±) | 5V~12V ±2.5V~6V |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 1.5 GHz |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Unity Gain BW-Nom | 1800000 kHz |
| Voltage Gain | 81dB |
| Power Supply Rejection Ratio (PSRR) | 82dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.6V |
| Voltage - Input Offset | 100μV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 95MHz |
| Bias Current-Max (IIB) @25C | 20μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMH6624MF/NOPB Overview
In order to protect the op amps, a SC-74A, SOT-753 case is used. Op amps are Voltage Feedback types of amplifier on the chip. A Tape & Reel (TR) case is used for delivering the op amp. There have been a total of 5 terminations over the past year. A total of 5 pins are located on this board. Please take in mind that op amp should be run at 2.5V. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The op amp ic has an array of 5 pins on it. With regards to the offset voltage of the input, buffer amplifier is rated at 500μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperature81dB should remain the voltage gain. In total, there are 1 circuits on this buffer amplifier. The op amp ic has 1 channels on it. The operating supply voltage of instrumentation amplifier is rated 9V voltage. To pack the operational amplifier ics, TR is adopted as the packing method.
LMH6624MF/NOPB Features
5 Pins
supply voltage of 2.5V
81dB voltage gain
LMH6624MF/NOPB Applications
There are a lot of Texas Instruments LMH6624MF/NOPB Instrumentational OP Amps applications.
- Power generator
- Weak signal detection
- Multimedia playback equipment
- Image computer boards
- Measurements of Wheatstone bridge
- Test and measurement instruments
- Radar
- Industrial control system
- Video computer boards
- PDA
