LMH6626MA/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Base Part Number | LMH6626 |
| Pin Count | 8 |
| Operating Supply Voltage | 9V |
| Number of Elements | 2 |
| Operating Supply Current | 12mA |
| Nominal Supply Current | 12mA |
| Output Current | 80mA |
| Slew Rate | 360V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 13μA |
| Voltage - Supply, Single/Dual (±) | 5V~12V ±2.5V~6V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 100μV |
| Bandwidth | 1.5 GHz |
| Gain Bandwidth Product | 1.3GHz |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Unity Gain BW-Nom | 1600000 kHz |
| Voltage Gain | 80dB |
| Power Supply Rejection Ratio (PSRR) | 82dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.6V |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 85MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Number of Amplifiers | 1 |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMH6626MA/NOPB Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. Voltage Feedback-type instrumentation amplifiers are used in this application. Upon delivery, op amp ic is packaged in a Tube case. A total of 8 pins are located on this board. As a reminder, this buffer op amp should be powered by 2.5V battery and that the battery should be inserted in the amplifier. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. Regarding input offset voltage, op amp rates 100μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 12mA and 10 . Op amp is a member of the 80dB's 80dB family. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 2. The operating supply voltage of the buffer op amp is rated at 9V. In total, there are 1 op amps on the device.
LMH6626MA/NOPB Features
8 Pins
supply voltage of 2.5V
80dB voltage gain
LMH6626MA/NOPB Applications
There are a lot of Texas Instruments LMH6626MA/NOPB Instrumentational OP Amps applications.
- Band-pass filter
- Scintillation detectors
- Professional videography
- Hand-held batteries
- Polarized electrodes
- ECG equipment
- Image computer boards
- Non-polarized electrodes
- Home audio systems
- Semiconductor detectors
