LMH6629MFE/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | LMH6629 |
| Pin Count | 5 |
| Number of Channels | 1 |
| Current - Supply | 15.5mA |
| Slew Rate | 1600V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 82 dB |
| Current - Input Bias | 15μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 250mA |
| Input Offset Voltage (Vos) | 780μV |
| Bandwidth | 900MHz |
| Gain Bandwidth Product | 900MHz |
| Unity Gain BW-Nom | 4000000 kHz |
| Voltage Gain | 78dB |
| Power Supply Rejection Ratio (PSRR) | 81dB |
| Low-Offset | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 150μV |
| Current - Output / Channel | 250mA |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 1GHz |
| Bias Current-Max (IIB) @25C | 23μA |
| Programmable Power | NO |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMH6629MFE/NOPB Overview
In order to protect the op amps, a SC-74A, SOT-753 case is used. Op amps are Voltage Feedback types of amplifier on the chip. The op amp is delivered to you in a Tape & Reel (TR) case. It is estimated that there will be at least 5 terminations this year. It consists of a total of 5 pins in total. The linear amplifier should be run at 3.3V at all times, so please keep that in mind when using it. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. An 5-pin op amp ic is included in the package. Regarding input offset voltage, buffer amplifier rates 780μV voltage. The mounting type that is recommended for this electrical part is Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. Maintain 78dB as the voltage gain. The op amp ic has 1 channels on it. It is used TR to pack the op amps. A supply of 15.5mA or higher is recommended for use with this electronic part.
LMH6629MFE/NOPB Features
5 Pins
supply voltage of 3.3V
78dB voltage gain
LMH6629MFE/NOPB Applications
There are a lot of Texas Instruments LMH6629MFE/NOPB Instrumentational OP Amps applications.
- Inverse/same-phase proportional circuit
- Large motor controllers
- Hand-held batteries
- Measurements of Wheatstone bridge
- Test and measurement instruments
- Tablets
- Precision measurement
- Navigation
- Power transmission
- Signal filtering
