LMH6640MF/NOPB
| Parameters | |
|---|---|
| Lifecycle Status | LIFEBUY (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | LMH® |
| JESD-609 Code | e3 |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LMH6640 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Nominal Supply Current | 4mA |
| Output Current | 100mA |
| Slew Rate | 170V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 72 dB |
| Current - Input Bias | 1μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~16V ±2.25V~8V |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 62MHz |
| Unity Gain BW-Nom | 59000 kHz |
| Voltage Gain | 95dB |
| Power Supply Rejection Ratio (PSRR) | 72dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 190MHz |
| Bias Current-Max (IIB) @25C | 2.6μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Offset Current-Max (IIO) | 0.8μA |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMH6640MF/NOPB Overview
Op amp is packaged in SC-74A, SOT-753 case. Voltage Feedback-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. A total of 5 terminations have been reported in the past few weeks. The total number of pins on linear amplifier is 5. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. This particular linear amplifier is a type of Operational Amplifier device, to be precise. An 5-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 5mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . It is a member of the 95dB's 95dB family. A instrumentation amplifier like this has 1 circuits. Buffer op amp is equipped with 1 channels on the device. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. A TR-shaped amplifier is used to pack the buffer amps. LMH? corresponds to linear amplifier's series.
LMH6640MF/NOPB Features
5 Pins
supply voltage of 5V
95dB voltage gain
Output Type: Rail-to-Rail
LMH6640MF/NOPB Applications
There are a lot of Texas Instruments LMH6640MF/NOPB Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Digital cameras
- Home audio systems
- Multiplication circuits
- Voltage regulation circuit
- Exponential operation circuits
- High input resistance broadband
- Inverse/same-phase proportional circuit
- Computer workstations
- Industrial control system
