LMH6642MF/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | LMH6642 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Nominal Supply Current | 2.7mA |
| Output Current | 75mA |
| Slew Rate | 135V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 72 dB |
| Current - Input Bias | 1.6μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12.8V ±1.35V~6.4V |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 130MHz |
| Gain Bandwidth Product | 130MHz |
| Unity Gain BW-Nom | 57000 kHz |
| Voltage Gain | 98dB |
| Power Supply Rejection Ratio (PSRR) | 79dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 46MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Offset Current-Max (IIO) | 0.8μA |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMH6642MF/NOPB Overview
In the package, you will find a SC-74A, SOT-753-case to contain the op amp ic. This is a Voltage Feedback type op amp. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 5 terminations this year. Buffer amplifier has a total of 5 pins. Please take in mind that op amp should be run at 3V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. Linear amplifier includes 5 pins. Op amp rates 5mV as input offset voltage. For this electronic part, it is recommended that you mount it with type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureMaintain 98dB as the voltage gain. On this instrumentation amplifier, there are 1 circuits that are connected together. Instrumentation amplifier has 1 channels on it. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. This linear amplifier pack is based on the TR axis.
LMH6642MF/NOPB Features
5 Pins
supply voltage of 3V
98dB voltage gain
Output Type: Rail-to-Rail
LMH6642MF/NOPB Applications
There are a lot of Texas Instruments LMH6642MF/NOPB Instrumentational OP Amps applications.
- Multimedia playback equipment
- Power generator
- Test and measurement instruments
- Digital cameras
- Portable electronic products powered by batteries
- earphone
- Active probe
- Voltage regulation circuit
- Test equipment
- Signal operation
