LMH6644MTX/NOPB

4 Channels 75mA per Channel 20nA 72 dB Instrumentational OP Amps 2.6μA 2.7V~12.8V ±1.35V~6.4V LMH6644 14 Pins 14-TSSOP (0.173, 4.40mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-LMH6644MTX/NOPB
Package: 14-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 128
Description: 4 Channels 75mA per Channel 20nA 72 dB Instrumentational OP Amps 2.6μA 2.7V~12.8V ±1.35V~6.4V LMH6644 14 Pins 14-TSSOP (0.173, 4.40mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Number of Pins	14
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Operational Amplifier
Packing Method	TR
Technology	BIPOLAR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	3V
Base Part Number	LMH6644
Pin Count	14
Output Type	Rail-to-Rail
Number of Channels	4
Operating Supply Current	2.7mA
Nominal Supply Current	2.7mA
Output Current	75mA
Slew Rate	135V/μs
Amplifier Type	Voltage Feedback
Common Mode Rejection Ratio	72 dB
Current - Input Bias	20nA
Voltage - Supply, Single/Dual (±)	2.7V~12.8V ±1.35V~6.4V
Output Current per Channel	75mA
Input Offset Voltage (Vos)	5mV
Bandwidth	130MHz
Gain Bandwidth Product	130MHz
Unity Gain BW-Nom	57000 kHz
Voltage Gain	98dB
Average Bias Current-Max (IIB)	2.6μA
Power Supply Rejection Ratio (PSRR)	79dB
Low-Offset	NO
Frequency Compensation	YES
Supply Voltage Limit-Max	13.5V
Voltage - Input Offset	1mV
Low-Bias	NO
Micropower	NO
-3db Bandwidth	46MHz
Bias Current-Max (IIB) @25C	3.25μA
Programmable Power	NO
Neg Supply Voltage-Max (Vsup)	-2.5V
Input Offset Current-Max (IIO)	0.8μA
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

LMH6644MTX/NOPB Overview

The linear amplifier is packaged in a 14-TSSOP (0.173, 4.40mm Width) case which makes it easy for the consumer to handle. A Voltage Feedback-type buffer amplifier is shown here. The op amp is delivered to you in a Tape & Reel (TR) case. A total of 14 terminations have been reported in the past few weeks. The total number of pins on linear amplifier is 14. I would like to remind you that this buffer op amp should be powered by an 3V battery. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. The op amp ic has an array of 14 pins on it. With regard to input offset voltage, instrumentation amplifier is rated at 5mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. Operational amplifier can operate supply current at 2.7mA. There should be no change in the voltage gain. Buffer op amp is equipped with 4 channels on the device. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. A TR-shaped amplifier is used to pack the buffer amps.