LMH6645MA/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 16 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | VIP10™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LMH6645 |
| Pin Count | 8 |
| Output Type | Push-Pull, Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 725μA |
| Nominal Supply Current | 650μA |
| Output Current | 20mA |
| Slew Rate | 22V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 56 dB |
| Current - Input Bias | 650nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~12V ±1.25V~6V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 55MHz |
| Gain Bandwidth Product | 55MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 40000 kHz |
| Voltage Gain | 85dB |
| Average Bias Current-Max (IIB) | 2.2μA |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 55MHz |
| Bias Current-Max (IIB) @25C | 2μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Input Offset Current-Max (IIO) | 0.5μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMH6645MA/NOPB Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. Op amps are Voltage Feedback types of amplifier on the chip. A Tube case is used for delivering the op amp. There is a growing number of terminations approaching the number of 8. Buffer amplifier has a total of 8 pins on it. Please take in mind that this instrumentation amplifier should be run at 5V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. In total, the buffer amplifier consists of 8 pins. Regarding input offset voltage, buffer amplifier rates 1mV voltage. This electrical part should be mounted using type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 725μA . It is recommended to keep the voltage gain at 85dB at all times. As far as the device is concerned, buffer amplifier has 1 channels. As one of the many benefits of this buffer amplifier, it puts out Push-Pull, Rail-to-Rail signals, which is one of the many benefits it offers. VIP10? corresponds to the op amp's series.
LMH6645MA/NOPB Features
8 Pins
supply voltage of 5V
85dB voltage gain
Output Type: Push-Pull, Rail-to-Rail
LMH6645MA/NOPB Applications
There are a lot of Texas Instruments LMH6645MA/NOPB Instrumentational OP Amps applications.
- Thermocouples
- Laptop
- Radar
- Automotive sensors
- Video amplifiers
- Instrumentation
- Computer workstations
- Multimedia playback equipment
- Weighing systems
- Weak signal detection
