LMH6645MF/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | VIP10™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LMH6645 |
| Pin Count | 5 |
| Output Type | Push-Pull, Rail-to-Rail |
| Operating Supply Voltage | 9V |
| Number of Channels | 1 |
| Operating Supply Current | 725μA |
| Nominal Supply Current | 650μA |
| Output Current | 20mA |
| Slew Rate | 22V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 56 dB |
| Current - Input Bias | 650nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~12V ±1.25V~6V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 55MHz |
| Gain Bandwidth Product | 55MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 40000 kHz |
| Voltage Gain | 85dB |
| Average Bias Current-Max (IIB) | 2.2μA |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 1mV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 55MHz |
| Bias Current-Max (IIB) @25C | 2μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMH6645MF/NOPB Overview
In the package, you will find a SC-74A, SOT-753-case to contain the op amp ic. There are two types of operational amplifiers in this circuit. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. During the past two weeks, there have been close to 5 terminations. Buffer amplifier has a total of 5 pins. Please take in mind that this instrumentation amplifier should be run at 5V. Instrumentation amplifier is a part of Operational Amplifier. A total of 5 pins are present on the instrumentation amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 3mV. For this electrical component, Surface Mount is the recommended mounting type. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. In order for this instrumentation amplifier to operate, the supply current needs to be between 725μA and 10 . Voltage gain should remain at 85dB. As far as the device is concerned, buffer amplifier has 1 channels. In addition to outputting Push-Pull, Rail-to-Rail signals, this op amp ic offers a number of other advantages. The operating supply voltage of instrumentation amplifier is rated 9V voltage. As a result of this, the buffer amplifier is packed in TR. VIP10? is the number that corresponds to the series of the buffer op amp.
LMH6645MF/NOPB Features
5 Pins
supply voltage of 5V
85dB voltage gain
Output Type: Push-Pull, Rail-to-Rail
LMH6645MF/NOPB Applications
There are a lot of Texas Instruments LMH6645MF/NOPB Instrumentational OP Amps applications.
- Power generator
- Signal filtering
- Precision measurement
- Signal transformation
- Power control
- Inverse/same-phase proportional circuit
- Fission chambers
- High/low-pass filter circuit
- Oscilloscopes
- Power transmission
