LMH6646MA/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | VIP10™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LMH6646 |
| Pin Count | 8 |
| Output Type | Push-Pull, Rail-to-Rail |
| Number of Elements | 2 |
| Nominal Supply Current | 650μA |
| Output Current | 20mA |
| Current - Supply | 725μA |
| Slew Rate | 22V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 56 dB |
| Current - Input Bias | 650nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~12V ±1.25V~6V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 55MHz |
| Gain Bandwidth Product | 55MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 40000 kHz |
| Voltage Gain | 85dB |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 1mV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 55MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Input Offset Current-Max (IIO) | 0.5μA |
| Number of Amplifiers | 1 |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMH6646MA/NOPB Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. A Voltage Feedback-type buffer amplifier is shown here. The case in which buffer amplifier is delivered is called a Tube case. A total of 8 pins are located on this board. Please take in mind that this instrumentation amplifier should be run at 5V. It should be noted that this op amp is a type of Operational Amplifier device. The buffer op amp includes 8 pins. Regarding input offset voltage, buffer amplifier rates 3mV voltage. This electronic part is recommended for mounting type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~85°C. There should be no change in the voltage gain. On the output type, there are Push-Pull, Rail-to-Rail different types of op amps. A voltage rating of 2 is indicated for the op amp's operating supply voltage. In order to ensure optimal performance, an 725μA supply is recommended for this electrical component. The VIP10? indicates the series number of the op amp. On the linear amplifier, there are 1 amplifiers.
LMH6646MA/NOPB Features
8 Pins
supply voltage of 5V
85dB voltage gain
Output Type: Push-Pull, Rail-to-Rail
LMH6646MA/NOPB Applications
There are a lot of Texas Instruments LMH6646MA/NOPB Instrumentational OP Amps applications.
- Proportional operation circuits
- Video data acquisition
- Portable media players
- Power transmission
- Television broadcasting equipment
- Voltage regulation circuit
- Ultrasound transducers
- Power control
- Tablets
- Switching amplifier
