Parameters |
Voltage - Supply, Single/Dual (±) |
2.5V~12V ±1.25V~6V |
Output Current per Channel |
20mA |
Input Offset Voltage (Vos) |
1mV |
Bandwidth |
47MHz |
Gain Bandwidth Product |
55MHz |
Neg Supply Voltage-Nom (Vsup) |
-5V |
Unity Gain BW-Nom |
40000 kHz |
Voltage Gain |
85dB |
Average Bias Current-Max (IIB) |
2.2μA |
Power Supply Rejection Ratio (PSRR) |
75dB |
Low-Offset |
NO |
Frequency Compensation |
YES |
Supply Voltage Limit-Max |
6.3V |
Voltage - Input Offset |
1mV |
Low-Bias |
NO |
Micropower |
NO |
-3db Bandwidth |
55MHz |
Bias Current-Max (IIB) @25C |
2μA |
Programmable Power |
NO |
Neg Supply Voltage-Max (Vsup) |
-6.3V |
Input Offset Current-Max (IIO) |
0.5μA |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
VIP10™ |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Operational Amplifier |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
LMH6647 |
Pin Count |
8 |
Output Type |
Push-Pull, Rail-to-Rail |
Number of Elements |
1 |
Power Supplies |
3/5/+-5V |
Operating Supply Current |
725μA |
Nominal Supply Current |
650μA |
Output Current |
20mA |
Slew Rate |
22V/μs |
Amplifier Type |
Voltage Feedback |
Common Mode Rejection Ratio |
56 dB |
Current - Input Bias |
650nA |
LMH6647MA/NOPB Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. There are two types of operational amplifiers in this circuit. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. There have been a total of 8 terminations over the past year. A total of 8 pins are located on this board. Please take in mind that op amp should be run at 5V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 1mV. For this electrical component, Surface Mount is the recommended mounting type. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. As long as the supply current of the chip does not exceed 725μA, this op amp ic can operate. Voltage gain should remain at 85dB. One of its many advantages is that buffer op amp outputs Push-Pull, Rail-to-Rail signals. For the operating supply voltage of the op amp ic, there is a rating of 1. Buffer op amp series numbers are indicated by the VIP10?.
LMH6647MA/NOPB Features
8 Pins
supply voltage of 5V
85dB voltage gain
Output Type: Push-Pull, Rail-to-Rail
LMH6647MA/NOPB Applications
There are a lot of Texas Instruments LMH6647MA/NOPB Instrumentational OP Amps applications.
- Communication
- Video conversion and routing
- Biopotential
- Car stereo
- Mobile phone
- High-frequency data acquisition systems
- Video computer boards
- Thermocouples
- High/low-pass filter circuit
- Division circuits