LMH6658MM/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LMH6658 |
| Pin Count | 8 |
| Number of Elements | 2 |
| Operating Supply Current | 6.5mA |
| Nominal Supply Current | 6.2mA |
| Output Current | 80mA |
| Slew Rate | 700V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 72 dB |
| Current - Input Bias | 5μA |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±1.5V~6V |
| Output Current per Channel | 110mA |
| Input Offset Voltage (Vos) | 5mV |
| Gain Bandwidth Product | 140MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 140000 kHz |
| Voltage Gain | 95dB |
| Average Bias Current-Max (IIB) | 30μA |
| Power Supply Rejection Ratio (PSRR) | 72dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 270MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Wideband | YES |
| Input Offset Current-Max (IIO) | 0.3μA |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMH6658MM/NOPB Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case package that contains the instrumentation amplifiers. An op amp ic of the Voltage Feedback type. A Tape & Reel (TR) case is used to deliver the buffer op amp. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins on it. Please take in mind that this instrumentation amplifier should be run at 5V. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. The op amp ic has an array of 8 pins on it. Op amp ic rates 5mV for input offset voltage. This electronic component is recommended to be mounted using the mounting type Surface Mount. With regard to operating temperature, op amp ranges -40°C~85°C. As long as the supply current of the chip does not exceed 6.5mA, this op amp ic can operate. You should keep the voltage gain at 95dB for the time being. There are 2 elements in this buffer amplifier. An buffer amplifier is packed in a TR-shape according to the design.
LMH6658MM/NOPB Features
8 Pins
supply voltage of 5V
95dB voltage gain
LMH6658MM/NOPB Applications
There are a lot of Texas Instruments LMH6658MM/NOPB Instrumentational OP Amps applications.
- Hand-held batteries
- Video data acquisition
- Measurements of Wheatstone bridge
- Voltage regulation circuit
- Multiplication circuits
- Semiconductor detectors
- Automotive sensors
- Multimedia playback equipment
- Radar
- Test and measurement instruments
