LMH6672MRX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-PowerSOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 6V |
| Base Part Number | LMH6672 |
| Pin Count | 8 |
| Operating Supply Voltage | 6V |
| Number of Elements | 2 |
| Operating Supply Current | 7.2mA |
| Nominal Supply Current | 7.2mA |
| Output Current | 200mA |
| Slew Rate | 135V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 150 dB |
| Current - Input Bias | 8μA |
| Voltage - Supply, Single/Dual (±) | 5V~12V ±2.5V~6V |
| Output Current per Channel | 525mA |
| Input Offset Voltage (Vos) | 100μV |
| Gain Bandwidth Product | 90MHz |
| Neg Supply Voltage-Nom (Vsup) | -6V |
| Unity Gain BW-Nom | 180000 kHz |
| Voltage Gain | 73.98dB |
| Average Bias Current-Max (IIB) | 14μA |
| Power Supply Rejection Ratio (PSRR) | 72dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 100μV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 80MHz |
| Programmable Power | NO |
| Wideband | YES |
| Height | 1.7mm |
| Length | 4.89mm |
| Width | 3.9mm |
| Thickness | 1.48mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMH6672MRX/NOPB Overview
There is a 8-PowerSOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. Buffer amps of this type are called Voltage Feedback-types. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. There have been a total of 8 terminations over the past year. Buffer amplifier has a total of 8 pins on it. I would like to remind you that this buffer op amp should be powered by an 6V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. The op amp ic has an array of 8 pins on it. In terms of the input offset voltage, instrumentation amplifier rates at 100μV. For this electrical component, Surface Mount is the recommended mounting type. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~150°C . The buffer amplifier is capable of operating from a supply current of 7.2mA . You should keep the voltage gain at 73.98dB for the time being. 2 elements make up the design of this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 6V voltage. It is used TR to pack the op amps.
LMH6672MRX/NOPB Features
8 Pins
supply voltage of 6V
73.98dB voltage gain
LMH6672MRX/NOPB Applications
There are a lot of Texas Instruments LMH6672MRX/NOPB Instrumentational OP Amps applications.
- Computer workstations
- Image computer boards
- Radiation thermometry transducers
- Communication device
- Test and measurement instruments
- High input resistance broadband
- High speed sample
- Switching amplifier
- Blood pressure sensors
- Weak signal detection
