LMH6683MT/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | VIP10™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Base Part Number | LMH6683 |
| Pin Count | 14 |
| Number of Elements | 3 |
| Operating Supply Current | 6.5mA |
| Nominal Supply Current | 6.5mA |
| Output Current | 80mA |
| Slew Rate | 940V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 72 dB |
| Current - Input Bias | 5μA |
| Voltage - Supply, Single/Dual (±) | 3V~12V ±1.5V~6V |
| Output Current per Channel | 85mA |
| Input Offset Voltage (Vos) | 5mV |
| Gain Bandwidth Product | 380MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 100000 kHz |
| Voltage Gain | 95dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 190MHz |
| Bias Current-Max (IIB) @25C | 20μA |
| Programmable Power | NO |
| Wideband | YES |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMH6683MT/NOPB Overview
It is packaged in an 14-TSSOP (0.173, 4.40mm Width)-case that protects the operational amplifiers from damage. This is a Voltage Feedback type op amp. In the case of Tube cases, linear amplifier will be delivered. A total of 14 terminations have been reported in the past few weeks. Linear amplifier has a total of 14 pins. It is important to remember that this op amp should be operated at a voltage of 5V volts. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. There are 14 pins on this chip. With regard to input offset voltage, instrumentation amplifier is rated at 5mV. Surface Mount is the recommended mounting type of operational amplifiers. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . A supply current of 6.5mA can be used to operate this linear amplifier. There should be no change in the voltage gain. This linear amplifier has a total of 3 elements. VIP10? corresponds to the op amp's series.
LMH6683MT/NOPB Features
14 Pins
supply voltage of 5V
95dB voltage gain
LMH6683MT/NOPB Applications
There are a lot of Texas Instruments LMH6683MT/NOPB Instrumentational OP Amps applications.
- ECG equipment
- Information processing
- Laptop
- Multiplication circuits
- single/dual op amp sum and difference circuits
- High input resistance broadband
- Blood pressure sensors
- Band-stop filter
- Proportional operation circuits
- Video amplifiers
