LMH6702MAX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LMH6702 |
| Pin Count | 8 |
| Operating Supply Voltage | 6V |
| Number of Elements | 1 |
| Operating Supply Current | 12.5mA |
| Nominal Supply Current | 12.5mA |
| Output Current | 80mA |
| Slew Rate | 3100V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 45 dB |
| Current - Input Bias | 6μA |
| Voltage - Supply, Single/Dual (±) | 10V~12V ±5V~6V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 4.5mV |
| Gain Bandwidth Product | 1.7 GHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1700000 kHz |
| Power Supply Rejection Ratio (PSRR) | 47dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.75V |
| Voltage - Input Offset | 1mV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 140MHz |
| Bias Current-Max (IIB) @25C | 30μA |
| Programmable Power | NO |
| Wideband | YES |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMH6702MAX/NOPB Overview
Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. The instrumentation amplifier in this picture is of the Current Feedback-type. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. We are approaching the 8h termination of the year. Buffer amplifier has a total of 8 pins. This linear amplifier should be powered by an 5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. Linear amplifier includes 8 pins. Regarding input offset voltage, op amp rates 4.5mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . As long as the supply current of the chip does not exceed 12.5mA, this op amp ic can operate. Op amp has total of 1 elements. The operating supply voltage of the buffer op amp is rated at 6V. The linear amplifier is packaged by using a TR axis.
LMH6702MAX/NOPB Features
8 Pins
supply voltage of 5V
LMH6702MAX/NOPB Applications
There are a lot of Texas Instruments LMH6702MAX/NOPB Instrumentational OP Amps applications.
- Inverse/same-phase proportional circuit
- Integrator circuits
- Vehicle electronics
- Hand-held batteries
- Car stereo
- Information processing
- Mobile phone
- Medical instruments
- Biopotential
- High gain DC amplifier
