LMH6702MF/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LMH6702 |
| Pin Count | 5 |
| Max Output Current | 80mA |
| Number of Channels | 1 |
| Operating Supply Current | 12.5mA |
| Nominal Supply Current | 12.5mA |
| Output Current | 80mA |
| Slew Rate | 3100V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 45 dB |
| Current - Input Bias | 6μA |
| Voltage - Supply, Single/Dual (±) | 10V~12V ±5V~6V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 4.5mV |
| Bandwidth | 1.7 GHz |
| Gain Bandwidth Product | 1.7 GHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1700000 kHz |
| Power Supply Rejection Ratio (PSRR) | 47dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Settling Time | 13.4 ns |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 140MHz |
| Bias Current-Max (IIB) @25C | 30μA |
| Programmable Power | NO |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMH6702MF/NOPB Overview
A SC-74A, SOT-753 case is used to package the op amp. Op amps are Current Feedback types of amplifier on the chip. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. A total of 5 terminations have been reported in the past few weeks. The total number of pins on linear amplifier is 5. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. An 5-pin op amp ic is included in the package. Op amp rates 4.5mV as input offset voltage. This electronic part is best mounted with type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . This op amp can operate from a supply current at 12.5mA. Instrumentation amplifier has 1 channels on it. For packing the buffer amplifier, the TR-axis is adopted.
LMH6702MF/NOPB Features
5 Pins
supply voltage of 5V
LMH6702MF/NOPB Applications
There are a lot of Texas Instruments LMH6702MF/NOPB Instrumentational OP Amps applications.
- Inverse/same-phase proportional circuit
- Instrumentation
- Signal filtering
- Band-stop filter
- Ultrasound transducers
- Portable docking station
- Power generator
- Home audio systems
- Fast A/D and D/A converters
- Displayers for aircraft and air transportation control systems
