LMH6703MA/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LMH6703 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 11mA |
| Nominal Supply Current | 11mA |
| Output Current | 90mA |
| Slew Rate | 4500V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 45 dB |
| Current - Input Bias | 7μA |
| Voltage - Supply, Single/Dual (±) | 8V~12V ±4V~6V |
| Output Current per Channel | 90mA |
| Input Offset Voltage (Vos) | 7mV |
| Bandwidth | 1.2 GHz |
| Gain Bandwidth Product | 1.8 GHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1800000 kHz |
| Power Supply Rejection Ratio (PSRR) | 48dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1.5mV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 500MHz |
| Bias Current-Max (IIB) @25C | 35μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMH6703MA/NOPB Overview
There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. An op amp ic of the Current Feedback type. A Tube case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. The total number of pins on linear amplifier is 8. Please take in mind that this instrumentation amplifier should be run at 5V. To be specific, this instrumentation amplifier is a type of Operational Amplifier. Linear amplifier includes 8 pins. The input offset voltage is 7mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. With regard to operating temperature, op amp ranges -40°C~85°C. The buffer amplifier is capable of operating from a supply current of 11mA . 1 channels are available on the instrumentation amplifier.
LMH6703MA/NOPB Features
8 Pins
supply voltage of 5V
LMH6703MA/NOPB Applications
There are a lot of Texas Instruments LMH6703MA/NOPB Instrumentational OP Amps applications.
- Professional videography
- High speed sample
- Television
- Measurements of Wheatstone bridge
- Power control
- MP3
- Subtraction operation circuits
- Comparator
- Medical instruments
- RF cable systems
