LMH6703MF/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.953mm |
| Base Part Number | LMH6703 |
| Pin Count | 6 |
| Operating Supply Voltage | 6V |
| Number of Channels | 1 |
| Operating Supply Current | 11mA |
| Nominal Supply Current | 11mA |
| Output Current | 90mA |
| Slew Rate | 4500V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 45 dB |
| Current - Input Bias | 7μA |
| Voltage - Supply, Single/Dual (±) | 8V~12V ±4V~6V |
| Output Current per Channel | 90mA |
| Input Offset Voltage (Vos) | 7mV |
| Bandwidth | 1.2 GHz |
| Gain Bandwidth Product | 1.8 GHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 1800000 kHz |
| Power Supply Rejection Ratio (PSRR) | 48dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1.5mV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 500MHz |
| Bias Current-Max (IIB) @25C | 35μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMH6703MF/NOPB Overview
Op amp is packaged in SOT-23-6 case. Op amps are Current Feedback types of amplifier on the chip. A Tape & Reel (TR) case is used for delivering the op amp. The number of terminations approaches 6. A total of 6 pins are attached to buffer op amp. This linear amplifier should be powered by an 5V battery. Instrumentation amplifier is a part of Operational Amplifier. 6 pins are located on the operational amplifiers. There is an input offset voltage of 7mV for this buffer op amp. This electronic part is best mounted with type Surface Mount. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. The buffer amplifier is capable of operating from a supply current of 11mA . Instrumentation amplifier has 1 channels on it. The operating supply voltage of instrumentation amplifier is rated 6V voltage. For packing the buffer amplifier, the TR-axis is adopted.
LMH6703MF/NOPB Features
6 Pins
supply voltage of 5V
LMH6703MF/NOPB Applications
There are a lot of Texas Instruments LMH6703MF/NOPB Instrumentational OP Amps applications.
- RF cable systems
- Communication device
- Cinema or auditorium audio system
- Division circuits
- Multimedia playback equipment
- Non-polarized electrodes
- Portable electronic products powered by batteries
- Fast A/D and D/A converters
- Proportional counter tubes
- Automotive sensors
