LMH6704MF/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Weight | 200.998119mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | LMH® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 1MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Technology | BIPOLAR |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.95mm |
| Base Part Number | LMH6704 |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Channels | 1 |
| Operating Supply Current | 11.5mA |
| Output Current | 90mA |
| Slew Rate | 3000V/μs |
| Amplifier Type | Buffer |
| Current - Input Bias | 5μA |
| Voltage - Supply, Single/Dual (±) | 8V~12V ±4V~6V |
| Output Current per Channel | 90mA |
| Supply Type | Dual |
| Input Offset Voltage (Vos) | 8.3mV |
| Bandwidth | 650000 kHz |
| Gain Bandwidth Product | 200MHz |
| Voltage Gain | 6.193dB |
| Power Supply Rejection Ratio (PSRR) | 48dB |
| Voltage - Input Offset | 2mV |
| -3db Bandwidth | 650MHz |
| Dual Supply Voltage | 5V |
| Consumer IC Type | VIDEO AMPLIFIER |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMH6704MF/NOPB Overview
In the package, you will find a SOT-23-6-case to contain the op amp ic. Buffer-type instrumentation amplifiers are used in this application. A Tape & Reel (TR) case is used for delivering the op amp. The number of terminations approaches 6. 6 pins are included on the operational amplifiers. Regarding input offset voltage, op amp rates 8.3mV. For this electrical component, Surface Mount is the recommended mounting type. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. In order for this instrumentation amplifier to operate, the supply current needs to be between 11.5mA and 10 . Keeping the voltage gain at 6.193dB is the best course of action. As far as the device is concerned, buffer amplifier has 1 channels. 1 elements make up the design of this buffer amplifier. LMH? is the number that corresponds to the series of the buffer op amp. 1MOhm should be the range of resistance for the instrumentation amplifier. Using VIDEO AMPLIFIER, you can sort the electric component based on the type of consumer IC that is included.
LMH6704MF/NOPB Features
6.193dB voltage gain
Resistance of 1MOhm
LMH6704MF/NOPB Applications
There are a lot of Texas Instruments LMH6704MF/NOPB Instrumentational OP Amps applications.
- Polarized electrodes
- Fission chambers
- Proportional counter tubes
- Precision measurement
- pH (acidity)
- Video computer boards
- Scintillation detectors
- High input resistance broadband
- Differentiator circuits
- RF cable systems
