LMH6714MFX/NOPB
| Parameters | |
|---|---|
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Packaging | Tape & Reel (TR) |
| Series | VIP10™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Applications | Current Feedback |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LMH6714 |
| Pin Count | 5 |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Operating Supply Current | 5.6mA |
| Nominal Supply Current | 5.6mA |
| Output Current | 70mA |
| Slew Rate | 1800V/μs |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 48 dB |
| Voltage - Supply, Single/Dual (±) | 8V~12.5V ±4V~6.25V |
| Output Current per Channel | 70mA |
| Input Offset Voltage (Vos) | 6mV |
| Gain Bandwidth Product | 400MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 400000 kHz |
| Power Supply Rejection Ratio (PSRR) | 48dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 250MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Bias Current | 12μA |
| Wideband | YES |
| Height | 1.45mm |
| Length | 2.9mm |
LMH6714MFX/NOPB Overview
In the form of a Tape & Reel (TR), class d amplifier is packaged.SC-74A, SOT-753 package reduces space by providing access to class d amp.This amplifier lends itself well to Current Feedback because of its high performance.audio power amplifier is mounted on the PCB based on the method of Surface Mount.Audio amp can be located using its base part number LMH6714.On audio digital amplifier, there is a pin count of 5.Digital amplifier has a termination count of 5.Its -3db bandwidth is 250MHz.This audio power amplifier is included in Operational Amplifier.A 5.6mA supply current is used for operation.The board is constructed wamplifier ich 5 pins.If the temperature is less than 85°C, the system should operate.Operating temperatures should not fall below -40°C.Using 5V supply voltage results in high efficiency.Mounting is accomplished using Surface Mount.It is equipped with an amplifier type of OPERATIONAL AMPLIFIER.There is 70mA output current in this scenario.A total of 1 elements are present in audio amplifier.The FPGA is a member of the VIP10? series.
LMH6714MFX/NOPB Features
Operational Amplifier subcategory
5 pins
LMH6714MFX/NOPB Applications
There are a lot of Texas Instruments LMH6714MFX/NOPB Video Amps and Modules applications.
- Emergency call (eCall)
- Microphone Preamplifier Circuit
- High-End A/V Receivers
- Car Audio
- Automotive external amplifier
- General-Purpose Amplifier Applications
- Automotive active noise cancellation
- Broadcast Studio Equipment
- Analog and Digital Mixing Consoles
- Professional Audio Equipment
