LMH6715MAX/NOPB
| Parameters | |
|---|---|
| Applications | Current Feedback |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Max Power Dissipation | 1W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | LMH6715 |
| Pin Count | 8 |
| Number of Elements | 2 |
| Temperature Grade | INDUSTRIAL |
| Operating Supply Current | 5.8mA |
| Nominal Supply Current | 5.8mA |
| Output Current | 70mA |
| Slew Rate | 1300V/μs |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 50 dB |
| Voltage - Supply, Single/Dual (±) | 10V~12V ±5V~6V |
| Output Current per Channel | 70mA |
| Input Offset Voltage (Vos) | 6mV |
| Gain Bandwidth Product | 480MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 480000 kHz |
| Voltage Gain | 60dB |
| Power Supply Rejection Ratio (PSRR) | 46dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.75V |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 400MHz |
| Programmable Power | NO |
| Input Bias Current | 21μA |
| Neg Supply Voltage-Max (Vsup) | -6.75V |
| Wideband | YES |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Packaging | Tape & Reel (TR) |
| Series | VIP10™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
LMH6715MAX/NOPB Overview
There is a Tape & Reel (TR) packaged wclass d amplifierh class d amplifier.In order to save space, class d amp is included in the package 8-SOIC (0.154, 3.90mm Width).It is a very good choice for Current Feedback due to its high performance.A Surface Mount method is used to mount audio power amplifier on the PCB.Audio amp can be located using its base part number LMH6715.In this case, audio digital amplifier has a pin count of 8.Digital amplifier has 8 terminations.Its -3db bandwidth is 400MHz.As audio power amplifier of Operational Amplifier, this audio power amplifier is included.A supply current of 5.8mA is required to operate the amplifier.Using 8 pins, amplifier ic is constructed.Temperatures should be below 85°C.An operating temperature of at least -40°C is recommended.In order to achieve high efficiency, the supply voltage is set to 5V.It is mounted using Surface Mount.There is one amplifier type in the audio amplifier, which is OPERATIONAL AMPLIFIER.This scenario has a current output of 70mA.Upon gaining a voltage of 60dB, the audio amplifier ic becomes functional.There are 2 elements in total.The FPGA in this example belongs to the series called VIP10?.
LMH6715MAX/NOPB Features
Operational Amplifier subcategory
8 pins
LMH6715MAX/NOPB Applications
There are a lot of Texas Instruments LMH6715MAX/NOPB Video Amps and Modules applications.
- High-Fidelity (HiFi) Headphone Drivers
- Broadcast Studio Equipment
- Microphone Preamplifier Circuit
- Audio Test And Measurement
- Premium Audio
- Professional Audio Equipment
- High-End A/V Receivers
- HiFi Audio System Equipment
- General-Purpose Amplifier Applications
- Body Control Modules
