LMH6723MA/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Base Part Number | LMH6723 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 1mA |
| Output Current | 110mA |
| Slew Rate | 600V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 57 dB |
| Current - Input Bias | 2μA |
| Voltage - Supply, Single/Dual (±) | 4.5V~12V ±2.25V~6V |
| Output Current per Channel | 110mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 370MHz |
| Gain Bandwidth Product | 370MHz |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Unity Gain BW-Nom | 370000 kHz |
| Average Bias Current-Max (IIB) | 5μA |
| Power Supply Rejection Ratio (PSRR) | 59dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 95MHz |
| Bias Current-Max (IIB) @25C | 4μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMH6723MA/NOPB Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp ic of the Current Feedback type. A Tube case is used for delivering the op amp. There have been a total of 8 terminations over the past year. There are a total of 8 pins on this op amp. The linear amplifier should be run at 2.5V at all times, so please keep that in mind when using it. It should be noted that this op amp is a type of Operational Amplifier device. There are 8 pins on this chip. The input offset voltage is 1mV. This electronic part is best mounted with type Surface Mount. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. As long as the supply current of the chip does not exceed 1mA, this op amp ic can operate. The op amp ic has 1 channels on it.
LMH6723MA/NOPB Features
8 Pins
supply voltage of 2.5V
LMH6723MA/NOPB Applications
There are a lot of Texas Instruments LMH6723MA/NOPB Instrumentational OP Amps applications.
- E-book readers
- Portable media players
- High-frequency data acquisition systems
- Medical imaging
- Active probe
- Video computer boards
- Proportional counter tubes
- Proportional operation circuits
- Addition operation circuits
- Car stereo
