LMH6732MA/NOPB
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LMH6732 |
| Pin Count | 8 |
| Operating Supply Voltage | 6V |
| Number of Elements | 1 |
| Operating Supply Current | 9mA |
| Nominal Supply Current | 3.4mA |
| Output Current | 45mA |
| Slew Rate | 2700V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 49 dB |
| Current - Input Bias | 2μA |
| Voltage - Supply, Single/Dual (±) | 9V~12V ±4.5V~6V |
| Output Current per Channel | 115mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 540MHz |
| Gain Bandwidth Product | 540MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 540000 kHz |
| Average Bias Current-Max (IIB) | 6μA |
| Power Supply Rejection Ratio (PSRR) | 52dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 30MHz |
| Bias Current-Max (IIB) @25C | 20μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
LMH6732MA/NOPB Overview
There is a 8-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the Current Feedback-type. Upon delivery, op amp ic is packaged in a Tube case. During the past two weeks, there have been close to 8 terminations. Linear amplifier has a total of 8 pins. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. The op amp ic has an array of 8 pins on it. With regards to the offset voltage of the input, buffer amplifier is rated at 3mV. For this electrical component, Surface Mount is the recommended mounting type. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. An 9mA volt supply current is needed for this linear amplifier to operate. This linear amplifier has a total of 1 elements. The operating supply voltage of instrumentation amplifier is rated 6V voltage.
LMH6732MA/NOPB Features
8 Pins
supply voltage of 5V
LMH6732MA/NOPB Applications
There are a lot of Texas Instruments LMH6732MA/NOPB Instrumentational OP Amps applications.
- Power control
- pH (acidity)
- Weak signal detection
- Computer workstations
- Switching amplifier
- Gaming industry
- Semiconductor detectors
- Medical instruments
- Logarithmic operation circuits
- Band-stop filter
