LMH6732MF/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.953mm |
| Base Part Number | LMH6732 |
| Pin Count | 6 |
| Operating Supply Voltage | 6V |
| Number of Elements | 1 |
| Operating Supply Current | 9mA |
| Nominal Supply Current | 3.4mA |
| Output Current | 45mA |
| Slew Rate | 2700V/μs |
| Amplifier Type | Current Feedback |
| Common Mode Rejection Ratio | 49 dB |
| Current - Input Bias | 2μA |
| Voltage - Supply, Single/Dual (±) | 9V~12V ±4.5V~6V |
| Output Current per Channel | 115mA |
| Input Offset Voltage (Vos) | 3mV |
| Gain Bandwidth Product | 540MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 540000 kHz |
| Power Supply Rejection Ratio (PSRR) | 52dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 3mV |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 30MHz |
| Bias Current-Max (IIB) @25C | 20μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Wideband | NO |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMH6732MF/NOPB Overview
It is packaged in an SOT-23-6-case that protects the operational amplifiers from damage. Current Feedback-type instrumentation amplifiers are used in this application. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. There have been a total of 6 terminations over the past year. There are a total of 6 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. The op amp ic has an array of 6 pins on it. With regard to input offset voltage, instrumentation amplifier is rated at 3mV. For this electronic part, it is recommended that you mount it with type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. An 9mA volt supply current is needed for this linear amplifier to operate. 1 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 6V. For packing the buffer amplifier, the TR-axis is adopted.
LMH6732MF/NOPB Features
6 Pins
supply voltage of 5V
LMH6732MF/NOPB Applications
There are a lot of Texas Instruments LMH6732MF/NOPB Instrumentational OP Amps applications.
- High input resistance broadband
- Laptop
- Medical imaging
- Communication device
- Broadcasting
- Signal amplification
- Non-polarized electrodes
- Computer workstations
- Radar
- Tablets
