banner_page

LMK03001ISQ/NOPB

3.3V Clock Conditioner 1.57GHz LMK03001 Clock Generators 48 Pins 48-WFQFN Exposed Pad 48 Terminals Surface Mount 3.15V~3.45V Tape & Reel (TR)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LMK03001ISQ/NOPB
  • Package: 48-WFQFN Exposed Pad
  • Datasheet: -
  • Stock: 684
  • Description: 3.3V Clock Conditioner 1.57GHz LMK03001 Clock Generators 48 Pins 48-WFQFN Exposed Pad 48 Terminals Surface Mount 3.15V~3.45V Tape & Reel (TR) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 day ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 48-WFQFN Exposed Pad
Number of Pins 48
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 48
Type Clock Conditioner
Terminal Finish Matte Tin (Sn)
Voltage - Supply 3.15V~3.45V
Terminal Position QUAD
Peak Reflow Temperature (Cel) 260
Supply Voltage 3.3V
Terminal Pitch 0.5mm
Frequency 200MHz
Base Part Number LMK03001
Output LVDS, LVPECL
Pin Count 48
Number of Outputs 9
Number of Circuits 1
Nominal Supply Current 86mA
Frequency (Max) 1.57GHz
Input LVCMOS, LVDS, LVPECL
Ratio - Input:Output 1:8
Power Consumption 1.18W
Primary Clock/Crystal Frequency-Nom 800MHz
PLL No
Differential - Input:Output Yes/Yes
Divider/Multiplier Yes/No
Height 800μm
Length 7mm
Width 7mm
Thickness 750μm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

LMK03001ISQ/NOPB Overview


This clock IC is packaged using the Tape & Reel (TR) method. The 48-WFQFN Exposed Pad package embeds this Clock PLL. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. As a result, frequency synthesizers can be found to contain 48 terminations. To operate this time clock generator, 3.3V voltage should be applied. The input of this clock generator is designed to be LVCMOS, LVDS, LVPECL. To access the full performance of the electronic component, 1 circuits are implemented. There is a maximum frequency of 1.57GHz Max with this clock-based frequency generator. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. As far as the supply voltage is concerned, clock PLL can be used with 3.15V~3.45V. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. LVDS, LVPECL logic levels are supported by this RF synthesizer. This electronic component is usually classified as a Clock Conditioner component. It is a 48-bit clock PLL designed specifically for microprocessors. LMK03001 is the base part number for finding related electronic parts. A 48 pin is available on the PLL. Clock PLL is configured with 9 output. At a frequency of 200MHz, frequency generator is capable of achieving high efficiency.

LMK03001ISQ/NOPB Features


Available in the 48-WFQFN Exposed Pad
Supply voltage of 3.3V

LMK03001ISQ/NOPB Applications


There are a lot of Texas Instruments LMK03001ISQ/NOPB Clock Generators applications.

  • FSK demodulators
  • Peripheral devices
  • Phase modulation cellular systems
  • Coherent detection of the signal
  • Reference signals to RF systems
  • Local oscillators (LOs)
  • Local oscillator source in receiver
  • Skew suppression
  • Aerospace and defense
  • Clock generation systems

Write a review

Note: HTML is not translated!
    Bad           Good