LMK03033CISQE/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-WFQFN Exposed Pad |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Termination | SMD/SMT |
| Type | Clock Conditioner |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Supply | 3.15V~3.45V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 200MHz |
| Base Part Number | LMK03033 |
| Output | LVDS, LVPECL |
| Pin Count | 48 |
| Number of Outputs | 9 |
| Operating Supply Voltage | 3.3V |
| Interface | Serial |
| Number of Circuits | 1 |
| Operating Supply Current | 86mA |
| Nominal Supply Current | 161.8mA |
| Frequency (Max) | 2.16GHz |
| Input | LVCMOS, LVDS, LVPECL |
| Ratio - Input:Output | 1:8 |
| Power Consumption | 1.18W |
| Primary Clock/Crystal Frequency-Nom | 200MHz |
| PLL | No |
| Differential - Input:Output | Yes/Yes |
| Input Current | 5μA |
| Divider/Multiplier | Yes/No |
| Duty Cycle | 50 % |
| Height | 800μm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 750μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMK03033CISQE/NOPB Overview
It is packaged using the Tape & Reel (TR) method since it is a clock IC. Clock PLL is embedded in the 48-WFQFN Exposed Pad package. This clock generator will sustain a maximum temperature of 260 when reflown. As a result, frequency synthesizers can be found to contain 48 terminations. A voltage of 3.3V should be applied to this electronic frequency generator. It is designed that the Clock PLL's input should be LVCMOS, LVDS, LVPECL. To access the full performance of the electronic component, 1 circuits are implemented. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 2.16GHz. Surface Mount-slots make it easy to mount this electronic component on panels. Clock generator ic works with 3.15V~3.45V. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. There are several logic levels in LVDS, LVPECL logic that can be used with this clock generator. This is an electronic part that can be classified as a Clock Conditioner in this case. This clock-generating IC is a 48-bit device designed explicitly for microprocessors. It is possible to find its related electronic parts by searching for the base part number LMK03033. There is an available 48 pin on the clock generators. There is a maximum supply voltage of 3.3V that frequency generators can handle. Clock PLL is facilitated with 9 signal outputs to magnify output frequency as high as possible. At 200MHz, frequency synthesizer achieves high efficiency. A supply current of 86mA is required to fully operate clock PLL.
LMK03033CISQE/NOPB Features
Available in the 48-WFQFN Exposed Pad
Supply voltage of 3.3V
Operating supply voltage of 3.3V
LMK03033CISQE/NOPB Applications
There are a lot of Texas Instruments LMK03033CISQE/NOPB Clock Generators applications.
- Telecommunication systems
- Melting
- Televisions
- Reference signals to RF systems
- Frequency shifting decodes
- Test and instrumentation equipment
- Jitter reduction
- FPGA and processor clocks
- Closed circuit systems
- Test equipment
