LMK03033ISQE/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-WFQFN Exposed Pad |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Termination | SMD/SMT |
| Type | Clock Conditioner |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Supply | 3.15V~3.45V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 2.16GHz |
| Base Part Number | LMK03033 |
| Output | LVDS, LVPECL |
| Pin Count | 48 |
| Number of Outputs | 9 |
| Operating Supply Voltage | 3.3V |
| Interface | Serial |
| Number of Circuits | 1 |
| Nominal Supply Current | 86mA |
| Input | LVCMOS, LVDS, LVPECL |
| Ratio - Input:Output | 1:8 |
| Power Consumption | 1.18W |
| Primary Clock/Crystal Frequency-Nom | 200MHz |
| PLL | No |
| Differential - Input:Output | Yes/Yes |
| Input Current | 5μA |
| Divider/Multiplier | Yes/No |
| Duty Cycle | 50 % |
| Height | 800μm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 750μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMK03033ISQE/NOPB Overview
This clock IC is packaged using the Tape & Reel (TR) method. There is a clock generator embedded in the 48-WFQFN Exposed Pad package. This clock generator ic can sustain 260 degrees of temperature during reflowing. There are a total of 48 terminations in this file. This time clock generator should be voltaged at 3.3V. It is designed that the Clock PLL's input should be LVCMOS, LVDS, LVPECL. 1 circuits are used to achieve clock PLL's superior flexibility. PLL clock is mounted in the way of Surface Mount. As long as there are 3.15V~3.45V supply voltages provided, clock generator ic should work. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. There are several logic levels in LVDS, LVPECL logic that can be used with this clock generator. It has been classified as a Clock Conditioner electronic part, which means that it is a semiconductor. It is a 48-bit clock PLL designed specifically for microprocessors. Related electrical parts can be found for the base part number LMK03033. There are 48 pins that are available on the frequency generator. The maximum supply voltage that analog clock generator can handle is 3.3V. The frequency synthesizer features 9 signal outputs to ensure as high a frequency as possible. Using a frequency of 2.16GHz allows frequency synthesizer to achieve high efficiencies.
LMK03033ISQE/NOPB Features
Available in the 48-WFQFN Exposed Pad
Supply voltage of 3.3V
Operating supply voltage of 3.3V
LMK03033ISQE/NOPB Applications
There are a lot of Texas Instruments LMK03033ISQE/NOPB Clock Generators applications.
- Small signal recovery
- Signal modulation and demodulation
- Radio receivers
- Tracking filters
- Set-top boxes
- Laptops
- Pagers
- Threshold extension
- CPUs
- Bluetooth receivers
